Top 9 SDS Plus bits Makita – Masonry Chisels

As an Amazon Associate I earn from qualifying purchases.

1. Makita

#ad

SDS-Plus Chisel & Point Bit Set for SDS+ Rotary Hammers, Makita 3 Piece, Aggressive Demolition for Concrete & Tile, Carbide Tipped Bits

#ad
Makita #ad - Avoid lower priced & lower quality chisel and point bits that prematurely wear and strain the powertool, resulting in high bit consumption rate, ineffective demolishing and making the overall chiseling much more difficult | Makita's Single-Piece Chisels are heat-treated and forged for unmatched STRENGTH and LONGEVITY, project completion delays, with its sharp edge design for MAXIMUM masonry impact.

Makita’s point chisel demolishes and starts holes in concrete slabs, concrete, and all different types of stones | Makita’s Flat Chisel edges, masonry and brick | Makita’s Scaling Chisel removes scale, slate, masonry, mortar, brick, brick, stone, rust, chips, scales or channels concrete, masonry, stone and weld spatter or removes LARGE quantities of material.33 piece sds+ chuck set includes: 1 point bit 10" long + 1 flat chisel bit 10” long x 08" wide + 1 scaling chisel bit 10" Long x 1. 57” wide | engineered in japan for optimal use with Makita SDS-Plus Rotary Hammer while also fully compatible with All SDS-Plus Rotary Hammers.

Easily demolish concrete, and masonry longer & more precisely with makita’s hardened, safe chiseling & RELIABLE Demolition | Each Premium Makita bit is uniquely forged and heat-treated, single, designed for chipping, cold-steel piece bits for long life, brick, scaling and large area surface removal. Makita's 3-piece sds-plus chuck demolition bit set for sds+ rotary hammers with dedicated 3 premium, Concrete, Flat Chisel & Scaling Chisel for EASY Demolition into all your Masonry, long-Lasting, Heavy-Duty, Brick, Tungsten Carbide Point, Tile & Cinder Block applications.
BrandMakita #ad
ManufacturerMakita #ad
Height3 Inches
Length7.25 Inches
Weight0.9 Pounds
Width1 Inches
Part NumberP-08700
ModelP-08700

2. Makita

#ad

10/Pk, Makita B-61195 3/16" x 8" SDS-Plus Bit, 3-Cutter

#ad
Makita #ad - Aggressive head geometry in primary cutter engineered for use in concrete. Central guiding action engineered for more accurate holes. Engineered for reduced vibration. 3-cutter bit tip is engineered for drilling in reinforced concrete. Centering tip features a more aggressive design for faster hole starting.
BrandMakita #ad
ManufacturerMakita #ad
Height1.05 Inches
Length1.58 Inches
Weight1.04 Pounds
Width1.58 Inches
Part NumberB-61195
ModelB-61195

3. Makita

#ad

Makita D-21200 SDS Plus Drill and Chisel Set, 17 pc.

#ad
Makita #ad - Easy to carry and organize. Drill and chisel set for use with SDS Plus hammer drills. 12 drill bits and 5 Chisels.
BrandMakita #ad
ManufacturerMakita #ad
Height2.76 Inches
Length14.96 Inches
Weight0.02 Pounds
Width11.02 Inches
Part NumberD-21200
ModelD-21200

4. Makita

#ad

Makita 3 Piece, Deep HD Drilling for Concrete & Masonry, SDS-Plus Long Drill Bit Set for SDS+ Rotary Hammers, Carbide Tipped Bits

#ad
Makita #ad - Ideal for general contractors & construction industry that require an extra long flute size sDS-Plus bits for DEEPER anchoring lengths and DEEPER holes | Engineered in Anjo Aichi, Japan for Makita SDS-Plus Rotary Hammers and also fully compatible with All standard SDS-Plus Rotary Hammers. Avoid lower priced & lower quality bits that prematurely wear and strain or overheat the powertool, ineffective drilling and making the overall drilling/anchoring much more difficult | Makita's Single, project completion delays, One-Piece Bit design are heat forged for STRENGTH and LONGEVITY with a sharp edge Carbide Tip design for maximum impact on masonry/concrete material, resulting in high bit consumption rate, allowing for effective and precise drilling.

33 extra-long makita drill bit set includes: 1 bit of 1/2" x 12" with a 10" maximum drilling depth + 1 bit of 5/8" x 12" with a 10" Maximum drilling depth + 1 Bit of 1" x 10" with a 8" Maximum drilling depth.

Easily drill into deep concrete, brick, and masonry longer & steel bit integrity for unmatched lONG LIFE & more precisely with makita’s reinforced premium tungsten carbide & SAFE Drilling | The proprietary drill bit flute design allows for maximal concrete removal for both EASE OF USE and EFFECTIVENESS. Makita’s sds-plus deep drill bit set for sds+ rotary hammers with 3 extra-long & 1" diameter for smooth & thick, 5/8", Premium, & reliable drilling into 8-10" Reinforced Concrete, Tile, Tungsten Carbide Drill BITS of 1/2", Heavy-Duty, Brick & Cinder Block applications.
BrandMakita #ad
ManufacturerMakita #ad
Height3 Inches
Length13 Inches
Weight0.71 Pounds
Width0.75 Inches
Part NumberP-01000
ModelP-01000

5. Makita

#ad

Stainless Steel, 25/Pk, Makita D-00810-25 5/32" x 6-1/4" Sds-Plus Bit

#ad
Makita #ad - Convenient contractor pack contains 25 bits. Central guiding action for accurate holes. For drilling holes in a variety of masonry materials including concrete. Special impact grade Carbide. For use with rotary Hammers that accept bits with SDS-plus shanks. Engineered for reduced vibration and noise emissions. 4" usable length.
BrandMakita #ad
ManufacturerMakita #ad
Height0.31 Inches
Length0.31 Inches
Weight0.08 Pounds
Width6.25 Inches
Part NumberD-00810-25
ModelD-00810-25

6. Makita

#ad

10" Deep Drilling Into Concrete & Masonry, Makita 5 Pack, SDS-Plus 1/2” Drill Bits For SDS+ Rotary Hammers

#ad
Makita #ad - Makita’s 5 pack 1/2” sds+ drill bits for sds+ rotary hammer drills has 5 premium, long-lasting, screwing and fastening up to 10" into Masonry, Tungsten Carbide Bits for EASY & Reliable drilling, tile, Reinforced Concrete, Brick & Cinder Block. Avoid lower priced & lower quality bits that prematurely wear and strain or overheat the powertool, resulting in high bit consumption rate, ineffective drilling and making the overall drilling/anchoring much more difficult | Makita's Single-Piece Steel Bits are heat forged for strength and longevity with a sharp Carbide Tip edge design for maximum impact on masonry/concrete material, project completion delays, allowing for EFFECTIVE and PRECISE drilling.

Ideal for general contractors and construction industry that require ultra duty sds+ bits for reliable anchoring and sturdy holes DEEP into Reinforced Concrete or Heavy-Duty Masonry | Engineered in Japan for Makita SDS-Plus Rotary Hammer Drills and also fully compatible with All SDS-Plus Rotary Hammer Drills.

Five 1/2" ultra-duty makita sds-plus Drill Bits for Up to 10" Deep Drilling Depths. Easily & smoothly drill 4-5x more into reinforced concrete, brick and masonry by relying on Makita’s Reinforced, Premium Tungsten Carbide & steel bit integrity for unmatched ease, long life & SAFE Drilling | The Makita SDS-Plus drill bit flute is designed to allow maximal amount of concrete removal for both ease of use and effectiveness in concrete/masonry drilling.
BrandMakita #ad
ManufacturerMakita #ad
Height3 Inches
Length7.25 Inches
Weight0.71 Pounds
Width0.75 Inches
Part NumberD-00979
ModelD-00979 D-00935 D-00898

7. Makita

#ad

Makita B-61298 5 Pc. Sds-Plus Bit Set, 3-Cutter

#ad
Makita #ad - Centering tip features a more aggressive design for faster hole starting. Central guiding action engineered for more accurate holes. 3 cutting edges for maximum performance and rounder holes. Set includes 1 3/16" x 6", 1 5/16" x 6", 1 3/8" x 6", 1 1/4" x 6", 1 1/2" x 6" SDS-plus bits.3-cutter bit tip is engineered for drilling in reinforced concrete.
BrandMakita #ad
ManufacturerMakita #ad
Height0.76 Inches
Length0.59 Inches
Weight0.75 Pounds
Width2.84 Inches
Part NumberB-61298
ModelB-61298

8. Makita

#ad

10/Pk, Makita B-60872 3/16" x 6" SDS-Plus Bit, 2-Cutter

#ad
Makita #ad - Centering tip features a more aggressive design for faster hole starting. Self-centering Carbide tip. Aggressive head geometry in primary cutter engineered for use in concrete. Central guiding action engineered for more accurate holes. Engineered for reduced vibration.
BrandMakita #ad
ManufacturerMakita #ad
Height0.93 Inches
Length1.58 Inches
Weight0.92 Pounds
Width1.58 Inches
Part NumberB-60872
ModelB-60872

9. Makita

#ad

Accepts SDS-PLUS bits D-handle, Makita HR2475 1" Rotary Hammer

#ad
Makita #ad - 3-mode operation for "rotation Only", "Hammering with Rotation" or "Hammering Only" for multiple applications. One-touch sliding chuck for quick bit changes. Variable speed trigger enables user to match the speed to the application for greater versatility. Torque limiting clutch engineered to prevent gear damage by automatically disengaging gears if the bit binds. Powerful 7. 0 amp motor delivers 2 ft. Lbs. 2. 7 j. Of impact energy to handle the most demanding applications.
BrandMakita #ad
ManufacturerMakita #ad
Height13.03 Inches
Length4.37 Inches
Weight10.7 Pounds
Width19.25 Inches
Part NumberHR2475
ModelHR2475
Warranty1 year