As an Amazon Associate I earn from qualifying purchases.
1. Lufkin #ad
1066DN, Crescent Lufkin 5/8" X 6' Red End Engineer's Scale Wood Rule #adLufkin #ad
- Item package height: 0899999999082". Item package width: 2. 099999997858". Model number: 1066DN. Item package length: 8. 199999991636".
|Manufacturer||Apex Tool Group #ad|
|Part Number||Drake Off Road Tools|
|Warranty||Limited Lifetime Warranty|
2. Stabila #ad
Engineers Scale, Stabila 80015 Folding Ruler #adStabila #ad
- Premium beech wood segments. Fully sealed rivets. Weather/abrasion resistant. Fiberglass reinforced. Hardened steel springs.
3. Rhino Rulers #ad
Rhino Rulers Folding Engineer's Ruler 6' Length 10ths and Inches, 55125 #adRhino Rulers #ad
- Deeply embossed scales won't wear away under harsh working conditions. Made of polyamide reinforced with 30% fiberglass; Lasts 3x longer than wooden rulers. Model 55125 has tenths/hundreths/Feet on the front and Inches/Feet on the back.
Waterproof; will not warp or swell like wooden rulers; Wear resistant and maintenance free. Flexible and scratch resistant with 90° positive stop joints.
4. Lufkin #ad
Lufkin 1066D 6-Foot Wood Engineer Rule #adLufkin #ad
- Model number: 1066D. Item package length: 7. 99999999184". Item package width: 1. 99999999796". Item package height: 0599999999388".
|Manufacturer||Bon Tool #ad|
5. eBoot #ad
1/32, Architect, Office, School, Metric Ruler with Markings 1/8, 1/16, 1/64 Inch for Engineering, and Drawing 6 Inch, eBoot 2 Pack Stainless Steel Ruler Machinist Engineer Ruler #adeBoot #ad
- Warm notice: the ruler has squared off angles, please pay attention to it avoid scratching your hand; Children use under adult supervision. Practical uses: precision stainless steel ruler is handy to use as drawing straight edge or measuring device; Good for office, school, drawing, engineering and other tasks.
Durable ruler: maximum measuring length is up to 6 inches; Quantity: 2 x rulers, which are made of sturdy stainless steel for your long lasting use.
Double-face graduation: graduation on each side is precision; 1/ 64 inches and 1/ 32 inches gradations on one side; 1/ 16 inches and 1/ 8 inches graduation on the other side. Clear engraved markings: markings are engraved onto the ruler so they will not rub off over time; Clear marks provide accurate measurement.
6. Shinwa #ad
Shinwa 150 mm Rigid 15 mm x 0.5 mm Zero Glare Satin Chrome Stainless Steel Machinist Engineer Ruler/Rule with Graduations in mm and .5mm Model 13005 #adShinwa #ad
- Has a zero glare satin chrome finish which makes it easy to read and will prevent corrosion. Rule is 15 mm wide and. 5 mm thick. Made from the finest stainless steel available and is hardened and tempered.
Mm and. 5mm markings are precision photo etched and then black filled for easy readability. Conforms to japanese industrial Standard JIS B 7516 Grade 1.
7. Products Engineering Corporation PEC Tools #ad
1/16, 1/32 & 1/64 7506, PEC Tools Rigid 6" 4R Stainless Steel Satin Chrome Machinist Engineer Ruler Scale with Markings 1/8 #adProducts Engineering Corporation PEC Tools #ad
- Both long edges are ground flat and straight. 100% made in the usa by products Engineering Company PEC Tools, a premier US tool manufacturer. It is made from the finest hardened and tempered stainless steel.
Rigid rule is. 750" wide and. 035" thick. 4r graduations are precision photo etched and black filled and show 32nds and 64ths on one side and 8ths and 16ths on the reverse. 6" rigid 4r machinist ruler has a satin chrome finish that will resist scratches and rust.
8. PEC #ad
PEC Tools USA 12" Flexible Stainless 5R Machinist Engineer Ruler / Rule 1/64, 1/100, 1/10, 1/32 #adPEC #ad
- It is made from the finest stainless steel available and is hardened and tempered. It has a brushed finish and is precision photo etched and then black filled for easy readability.
This rule is made in the usa by Products Engineering Company PEC Tools, a premier US tool manufacturer. 5r markings with 1/10", 1/100" and quick-reading 1/32" and 1/64". Both long edges are ground flat and straight. 12" flexible rule is. 500" wide and. 020" thick.
9. PEC #ad
1/32, 1/10, PEC Tools USA 6" Flexible Stainless 5R Machinist Engineer ruler / rule 1/64, 1/100 #adPEC #ad
- It is made from the finest stainless steel available and is hardened and tempered. 6" flexible rule is. 500" wide and. 020" thick. This rule is made in the usa by Products Engineering Company PEC Tools, a premier US tool manufact.
5r markings with 1/10", 1/100" and quick-reading 1/32" and 1/64". It has a brushed finish and is precision photo etched and then black filled for easy readability. Both long edges are ground flat and straight.