As an Amazon Associate I earn from qualifying purchases.
RSR ELECTRONICS INC #ad - Quickly release the bulb and melted solder will be sucked into the tube. Removes solder quickly and easily with vacuum action. To remove solder from a joint: heat up the joint, squeeze the bulb and place the tip onto the joint.
60 40 solder solder remover cord soldering solder tin soldering iron mobile electronics soldering wire temperature controlled soldering iron copper Soldering Wire Electric Vacuum Solder 50/50 Solder Bar 1/4 Solder Sucker Bulb Electronics Soldering Solder Iron Tips 900m Electric Soldering Iron for Jewelry Electronic Soldering Wire Circuit Board Solder Electronic Soldering Paste Solder Paste Remover Polishing Bar Solder Learn to Solder Jewelry Soldering Paste Electronic Kits Soldering Solder Iron.
5mm soldering copper engineer solder sucker pump mini Pencil Torch Welder Electrodes Solder Wick Torch Tip 6000 Solder Sucker Silicone Tip Iron Wire Solder. Solder fan light 60/40 solder for stained glass engineer ss-02 solder sucker pump welding cable reel side by side electrical grease copper solder braid wick Leaded Solder Solder for Jewelry Making Solder Remover Tip Solder Sucker Tips Electrical Soldering Projects Electrodes 1/8 Solder Breadboard Solder Wick And Sucker Pencil Soldering Iron & Fine Electronics Solder Plumbing Soldering Wire Copper Solder Paste for Jewelry Solder Kits for Beginners Solder Board Small 50/50 Solder for Copper.
Lesnow #ad - The solder wicks can be used to correct mistakes with small boards on PCBs, re-solder mechanical keyboard switches, desoldering computer parts such as a motherboard, unsoldering old wire from devices, remove relays and other components from printed circuit boards, clean alloy on smd components and more.
1 pieces of no-clean solder wicks, each wick is about 10ft long and 01 inch in width, enough quantity and length for your daily needs.
This desoldering wick has geometrically-precise weave with copper and rosin, work from the tip of the desoldering wick, once the desoldering wick and the solder has been heated, the solder braid can quickly absorbed molten solder and left a clean working area.
MOGAOPI #ad - 4-in-1 solder removal tool 1pcs desoldering vacuum pumps, the desoldering wick absorbs solder, while the solder wick is better for small amounts of solder, 1pcs solder wicks and 1pcs High Temperature Resistance Silicone Protective Tube15cm Length, the desoldering pump pulls it away quick, 1pcs Spare nozzle, a must-have tool for electronics kit, the solder sucker takes up large amounts.
Widely used solder remover the desoldering wick & desoldering pump can be used to correct mistakes with small boards on PCBs, remove relays and other components from printed circuit boards, re-solder mechanical keyboard switches, desoldering computer parts such as a motherboard, unsoldering old wire from devices, clean alloy on smd components and more.
5mm width, work from the tip of the desoldering wick, this desoldering wick has geometrically-precise weave with copper and rosin, 1.5m length, once the desoldering wick and the solder has been heated, the solder braid can quickly absorbed molten solder and left a clean working area. Abs body with non-slip sponge and nylon nozzle desoldering pump the body of the desoldering vacuum pump is made of high quality ABS, also the covered sponge can absorb sweat and heat, which make the solder sucker delicate and durable, make it comfortable to hold, the nylon nozzle of the solder suck can endure high temperature, thus it can be used for a long time.
1. RSR ELECTRONICS INC
#adDesoldering Bulb for Soldering Irons, Electronix Express 1 Pack
#adMore information #ad
Rubber bulb with long lasting PTFE tip. Measures 3. 80" long and 2. 50" wide. To clean: wait until the solder has cooled, then remove the tip and dump out the contents of the bulb.| Brand | RSR ELECTRONICS INC #ad |
| Manufacturer | RSR ELECTRONICS INC #ad |
| Height | 2.5 Inches |
| Length | 3.8 Inches |
| Width | 2.5 Inches |
| Part Number | 60825 |
More information #ad
2. Weller
#adSolder-Off, Black, Weller 7805 Bulb
#adWeller #ad - Package dimensions: 2. 794 cm l x 11. 43 cm w x 11. 43 cm H. Country of Origin: Taiwan. Package Quantity: 1. Package Type: Tools. Model number: 7805.More information #ad
| Brand | Weller #ad |
| Manufacturer | Apex Tool Group #ad |
| Height | 2.5 Inches |
| Length | 5.5 Inches |
| Weight | 0.09 Pounds |
| Width | 1.6 Inches |
| Part Number | 7805 |
| Model | 7805 |
More information #ad
3. RadioShack
#adRadioShack Vacuum Desoldering Bulb with Teflon Tip
#adRadioShack #ad - Fast, one-handed desoldering. Teflon tip will not scratch delicate circuit boards. Suction action quickly removes excess solder.More information #ad
| Brand | RadioShack #ad |
| Manufacturer | RadioShack #ad |
| Weight | 0 Pounds |
| Width | 3.6 Inches |
| Part Number | 6402086 |
| Model | 6402086 |
More information #ad
4. American Beauty
#adAmerican Beauty SS-8 3oz Solder Sucker Bulb
#adAmerican Beauty #ad - Material type: Rubber/Plastic. Used in conjunction with our desoldering-braid. 3oz bulb provides extra 'vacuum' than smaller solder suckers. Rohs compliant. Easily remove and clean away unwanted solder. It's basic tool for removal of solder.More information #ad
| Brand | American Beauty #ad |
| Manufacturer | Assembly Tech International #ad |
| Height | 0.9 Inches |
| Length | 3.1 Inches |
| Weight | 0.05 Pounds |
| Width | 3 Inches |
| Part Number | SS-8 |
| Model | SS-8 |
More information #ad
5. Trailrest
#adHealth Card Sleeve Sleeve PVC Waterproof Soft Protective Anti-Contact PVC Card Office & Stationery Solder Sucker Bulb 14-E, One Size
#adTrailrest #ad - 50/50 solder soldering kits for electronics solder iron tip 3/16 steel welding coupons electronic soldering pick torch paste gas welding torch cleaning set stained Glass Solder 60/40 16oz Electric Screwdrivers for Small Electronics Electronics Soldering Paste Soldering Paste with Solder Stained Glass Solder Iron Hot Air Soldering Paste Soldering Clamp Solder Iron Tip Threaded Soldering Paste Applicator 60/40 Solder 1 Lb Solder Mat Battery Terminal Solder 50/50 Solder Spool Soldering Paste.60 40 solder solder remover cord soldering solder tin soldering iron mobile electronics soldering wire temperature controlled soldering iron copper Soldering Wire Electric Vacuum Solder 50/50 Solder Bar 1/4 Solder Sucker Bulb Electronics Soldering Solder Iron Tips 900m Electric Soldering Iron for Jewelry Electronic Soldering Wire Circuit Board Solder Electronic Soldering Paste Solder Paste Remover Polishing Bar Solder Learn to Solder Jewelry Soldering Paste Electronic Kits Soldering Solder Iron.
More information #ad
Battery soldering iron solder pot wire soldering soldering iron with soldering wire practice solder board electrical solder set jewelry solder chips heat Shrink Solder Torch Jewelry Soldering Wire Solder Holder Stained Glass Soldering Iron Speaker Wire Solder Ts100 Soldering Iron Power Cord Torch for Wiring Solder Pump Sucker Soldering Wire 1. 5mm soldering copper engineer solder sucker pump mini Pencil Torch Welder Electrodes Solder Wick Torch Tip 6000 Solder Sucker Silicone Tip Iron Wire Solder. Solder fan light 60/40 solder for stained glass engineer ss-02 solder sucker pump welding cable reel side by side electrical grease copper solder braid wick Leaded Solder Solder for Jewelry Making Solder Remover Tip Solder Sucker Tips Electrical Soldering Projects Electrodes 1/8 Solder Breadboard Solder Wick And Sucker Pencil Soldering Iron & Fine Electronics Solder Plumbing Soldering Wire Copper Solder Paste for Jewelry Solder Kits for Beginners Solder Board Small 50/50 Solder for Copper.
| Brand | Trailrest #ad |
| Manufacturer | Trailrest #ad |
| Part Number | ORWXCi8C |
More information #ad
6. Lesnow
#adLesnow solder wick braid with flux Super 10ft Length Desoldering Wick Braid Remover Tool Solder Sucker 1 piece No-Clean soldering Wick Wire Roll and Disassemble Electrical Components
#ad1 pieces of no-clean solder wicks, each wick is about 10ft long and 01 inch in width, enough quantity and length for your daily needs.
More information #ad
The desoldering wicks are made of copper wires with nice quality, precise weaving design can improve the capillary effect and the redundant solder absorbing ability, increasing your efficiency. The braided solder wicks are suitable for labs, home and industry welding work, practical tools to remove solder and correct errors on small PCB boards, bringing lots of convenience for your work. This desoldering wick has geometrically-precise weave with copper and rosin, work from the tip of the desoldering wick, once the desoldering wick and the solder has been heated, the solder braid can quickly absorbed molten solder and left a clean working area.
| Brand | Lesnow #ad |
| Manufacturer | Lesnow-FT #ad |
| Height | 0.5 Inches |
| Length | 5 Inches |
| Weight | 0.5 ounces |
| Width | 4 Inches |
| Part Number | Lesnow-FT-01 |
More information #ad
7. MOGAOPI
#adSolder Sucker & Desoldering Wick,1pcs Solder Braid Desoldering Vacuum Pump Solder Remover Tool, Spare nozzle, MOGAOPI Solder Wick and Desoldering Pump
#adWidely used solder remover the desoldering wick & desoldering pump can be used to correct mistakes with small boards on PCBs, remove relays and other components from printed circuit boards, re-solder mechanical keyboard switches, desoldering computer parts such as a motherboard, unsoldering old wire from devices, clean alloy on smd components and more.
More information #ad
One-handed solder sucker with powerful suction you can using the desoldering pump by just cocking it and pressing the trigger button with one hand when you are ready, the desoldering pump designed with double ring double open and "vacuum" button, which make the sucking power awesome. Desoldering wick with copper braid 1pcs solder braid with the size 2. 5mm width, work from the tip of the desoldering wick, this desoldering wick has geometrically-precise weave with copper and rosin, 1.5m length, once the desoldering wick and the solder has been heated, the solder braid can quickly absorbed molten solder and left a clean working area. Abs body with non-slip sponge and nylon nozzle desoldering pump the body of the desoldering vacuum pump is made of high quality ABS, also the covered sponge can absorb sweat and heat, which make the solder sucker delicate and durable, make it comfortable to hold, the nylon nozzle of the solder suck can endure high temperature, thus it can be used for a long time.
| Brand | MOGAOPI #ad |
| Manufacturer | MOGAOPI #ad |
| Height | 0.79 Inches |
| Length | 8.27 Inches |
| Weight | 0.19 Pounds |
| Width | 0.79 Inches |
| Part Number | DP-01 |
More information #ad
8. Hakko
#adHakko FR300-05/P Desoldering Tool
#adHakko #ad - This is an o. E. M. Fits with various American hakko brand models. Authorized part. Oem part # fr300-05/P.More information #ad
| Brand | Hakko #ad |
| Manufacturer | Hakko #ad |
| Height | 2.85 Inches |
| Length | 12.5 Inches |
| Weight | 3.7 Pounds |
| Width | 11.75 Inches |
| Part Number | FR300-05/P |
| Model | FR300-05/P |
More information #ad
