Top 8 Lynx Hand Saw – Handsaws

As an Amazon Associate I earn from qualifying purchases.

1. Lynx

#ad

Lynx 26-Inch Hand Saw Filed for Cross Cutting 8 TPI with Taper Ground Blade and Stained Beech Handle

#ad
Lynx #ad - Taper ground blade to minimize binding during the cut. Handle is made from stained European Beech with brass button screws. 8 teeth per inch tpi, i. E. Precisely hand sharpened and set to ensure the best possible cross cut, for cutting across the grain. Full-sized blade that is 26” long and made from alloy spring steel for a good combination of flexibility and hardness. Made in sheffield, england by thomas Flinn & Co. A highly respected maker that has been making quality saws since the year 1923.
BrandLynx #ad
ManufacturerThomas Flinn & Co. #ad
Weight1.9 Pounds
Part NumberLHB26
ModelLHB26

2. Lynx

#ad

Lynx 3' One Man Crosscut Saw

#ad
Lynx #ad - Beech handle, plus auxiliary handle for use as a two-man version if required. British cs80 steel, 1. 5mm thick blade. Each tooth is hand set. Special great american Tooth pattern for use on logs, etc. Can be re-sharpened using a large triangular file.
BrandLynx #ad
ManufacturerThos. Flinn & Co./Garlick Saw #ad
Height6.5 Inches
Length41 Inches
Weight3.97 Pounds
Width3.76 Inches
Part Number3ft1MAN
Model3ft1MAN

3. Lynx / Taytools

#ad

Lynx Garlick Taytools Thomas Flinn British 26” Crosscut Saw with Taper Ground Blade, Stained Beech Handle 10 TPI Filed for Cross Cutting

#ad
Lynx / Taytools #ad - Saw plate is made from sheffield allow spring steel and taper ground providing a good balance of edge durability and ease of sharpening. Handle is stained European Beech with brass button screws. This greatly reduced binding in the cuts. The saw plate is taper-ground and gets progressively thinner approx. This saw is made by thomas Flinn of Sheffield England the last traditional saw and plane maker in the UK. 0005 inches from the teeth to the back of the saw. 26” saw plate has 10 TPI and filed for cross cutting.
BrandLynx / Taytools #ad
ManufacturerThomas Flinn and Company LTD #ad
Height1 Inches
Length33 Inches
Weight2 Pounds
Width7 Inches
Part NumberLPB24
ModelLPB24

4. Lynx

#ad

Lynx 26-Inch Hand Saw Filed for Rip Cutting 4.5 TPI with Taper Ground Blade and Stained Beech Handle

#ad
Lynx #ad - Taper ground blade to minimize binding during the cut. Full-sized blade that is 26” long and made from alloy spring steel for a good combination of flexibility and hardness. Handle is made from stained European Beech with brass button screws. Made in sheffield, england by thomas Flinn & Co. A highly respected maker that has been making quality saws since the year 1923. 4. 5 teeth per inch tpi, for cutting with the grain, i. E. Precisely hand sharpened and set to ensure the best possible rip cut, lengthwise.
BrandLynx #ad
ManufacturerThomas Flinn & Co. #ad
Weight1.98 Pounds
Part NumberLRB26
ModelLRB26

5. Lynx / Taytools

#ad

Lynx Garlick Taytools Thomas Flinn British 24” Rip Saw with Taper Ground Blade, Stained Beech Handle 4.5 TPI Filed for Rip Cutting

#ad
Lynx / Taytools #ad - This saw is made by thomas Flinn of Sheffield England the last traditional saw and plane maker in the UK. 0005 inches from the teeth to the back of the saw. Handle is stained European Beech with brass button screws. This greatly reduced binding in the cuts. Saw plate is made from sheffield allow spring steel and taper ground providing a good balance of edge durability and ease of sharpening. 24” saw plate has 4. 5 tpi and filed for rip cutting. The saw plate is taper-ground and gets progressively thinner approx.
BrandLynx / Taytools #ad
ManufacturerThomas Flinn and Company LTD #ad
Weight2 Pounds
Part NumberLRB24
ModelLRB24

6. Lynx

#ad

England, Lynx 8-Inch Dovetail Saw with Full Handle and Filed for Cross Cutting 20 TPI – Made in Sheffield

#ad
Lynx #ad - A massive brass back provides rigidity and holds the 8” long blade securely. Handle is made from stained European Beech with brass button screws. Maximum depth of cut is 2-1/4”. Made in sheffield, england by thomas Flinn & Co. A highly respected maker that has been making quality saws since the year 1923. 20 teeth per inch tpi, i. E. Precisely hand sharpened and set to ensure the finest possible cross cut, for cutting across the grain.
BrandLynx #ad
ManufacturerThos. Flinn & Co. / Garlick Saw #ad
Height1.3 Inches
Length14 Inches
Weight1 Pounds
Width5 Inches

7. Lynx

#ad

Lynx LDB8R 8-Inch 20 tpi Rip Dovetail Saw

#ad
Lynx #ad - 8" dovetail saw 20tpi for Rip work in dovetail joints and other fine woodworking tasks. Item can be re-sharpened. Made in Sheffield, England. Made from high quality carbon steel with a beech handle. Heavy folded brass back gives perfect weight and tension to the blade.
BrandLynx #ad
ManufacturerThomas Flinn #ad
Height1.3 Inches
Length14 Inches
Weight0.95 Pounds
Width5 Inches
Part NumberLDB8R
ModelLDB8R

8. Lynx / Taytools

#ad

Stained Beech Handle 4.5 TPI and Filed for Rip Cutting, Lynx Garlick Thomas Flinn British 22” Rip Saw with Taper Ground Blade

#ad
Lynx / Taytools #ad - 0005 inches from the teeth to the back of the saw. Saw plate is made from sheffield allow spring steel and taper ground providing a good balance of edge durability and ease of sharpening. This saw is made by thomas Flinn of Sheffield England the last traditional saw and plane maker in the UK. Handle is stained European Beech with brass button screws. 22” saw plate has 4. 5 tpi and filed for rip cutting. The saw plate is taper-ground and gets progressively thinner approx. This greatly reduced binding in the cuts.
BrandLynx / Taytools #ad
ManufacturerThomas Flinn and Company LTD #ad
Part NumberVP10