Top 8 H Bridge Motor Driver – Electrical Motor Controls

As an Amazon Associate I earn from qualifying purchases.

1. Qunqi


Qunqi 2Packs L298N Motor Drive Controller Board Module Dual H Bridge DC Stepper For Arduino

Qunqi #ad - Use large-capacity filter capacitors and diode with freewheeling protection function, increasing reliability. Dual-channel h-bridge driver working mode creates higher working efficiency, L298N as main chip.

Can drive one 2-phase stepper motor, one 4-phase stepper motor or two DC motors. Large capacity filter capacitance, afterflow protection diode, more stable and reliable. High working power to 35v, large current can reach 3A MAX and continue current is 2A, power to 25w. To avoid damage the voltage stabilizing chip, please use an external 5V logic supply when using more than 12V driving voltage.
BrandQunqi #ad
ManufacturerQunqi #ad
Weight0.11 Pounds
Part NumberMK-050-2



WMYCONGCONG 5 PCS L298N Motor Drive Controller Board Module Dual H Bridge DC Stepper Module for Arduino

WGCD #ad - L298n main driving chip, low calorific value, high drive ability, strong anti-interference capability. With built-in 78m05 to supply power, when the driving voltage is greater than 12V, to avoid the damage of voltage regulator chip, please use the external 5V logic power supply. Package: 5 pcs l298N motor controller board module. Size: 43 * 43 * 27 mm/1. 69 * 1. 49 * 1. 06in. Dual h bridge dc stepper module, more stable and higher work efficiency.
BrandWGCD #ad
ManufacturerWGCD 1 #ad
Part NumberL298N-MOTOR-5P

3. Aideepen


Aideepen 5pcs 1.5A 2 Way DC Motor Driver Module Speed Dual H-Bridge Replace Stepper L298N

Aideepen #ad - Dual h-bridge motor driver, can drive two DC motors or a 4-wire two-phase stepper motor. Dual 1. 5a * 2, the peak current to be 2. 5a, built-in thermal protection circuit, do not be afraid motor stall burned, automatic recovery after the temperature dropped. Use of imported original chip, built-in low on-resistance MOS switch. Minimal heat, small size, no heat sink, low power consumption, is ideal for battery powered. Small size, light weight, 0 standby current, is the ideal choice for your car model.
BrandAideepen #ad
ManufacturerAideepen #ad
Part Number0113395



KOOBOOK 2Pcs DRV8833 Motor Drive Module 1.5A Dual H Bridge DC Gear Motor Driver Controller Board

KOOBOOK #ad - Size: 18. 5*16mm. With low power sleep mode. Input voltage: 3-10V. Built-in overcurrent protection, short circuit protection, undervoltage lockout and overtemperature protection. Single h bridge output current: 1. 5a, can drive 2 DC geared motors. For diy smart car robot, it can drive DC motors up to 1. 5a and 4-wire stepper motors.
BrandKOOBOOK #ad
ManufacturerKOOBOOK #ad
Part NumberKB035

5. AiTrip


4Pack L298N Motor Drive Controller Board DC Dual H-Bridge Robot Stepper Motor Control and Drives Module for Arduino Smart Car Power UNO MEGA R3 Mega2560

AiTrip #ad - To avoid damage the voltage stabilizing chip, please use an external 5V logic supply when using more than 12V driving voltage. Using large capacity filter capacitor, this module can follow current to protect diodes, and improve the reliability.

Using l298n made by st company as the control chip, the module has such characteristics as strong driving ability, low calorific value and strong anti-interference ability. This module can use built-in 78m05 for electric work via a driving power supply part. But to avoid the damage of the voltage stabilizing chip, please use an external 5V logic supply when using more than 12V driving voltage. Dual-channel H-bridge driver working mode creates higher working efficiency.
BrandAiTrip #ad
ManufacturerAiTrip #ad

6. Aideepen


Aideepen Double BTS7960B DC 43A Stepper Motor Driver Module H-Bridge PWM Driving Board for Arduino Smart Car

Aideepen #ad - Double bts7960b large current 43A H bridge driver. 5v isolate with mCU, and effectively protect MCU. Voltage indication of motor driver output end, can solder heat sink. Can reverse the motor forward, two PWM input frequency up to 25kHZ. Double bts7960b h-bridge driver circuit, with a strong drive and braking, effectively isolating the microcontroller and motor driver.
BrandAideepen #ad
ManufacturerAideepen #ad
Part Number7010261

7. Twotrees


Upgraded Version …, Twotrees Stepper Motor Driver, TB6600 4A 9-42V Nema 17/23 CNC Controller Single Axes Hybrid

Twotrees #ad - 3motor driver: 9v-42v dc power supply, h-bridges bipolar constant phase current drive. 2suitable for a wide range of stepper motors from nema size 17, such as XYZ tables, labellers, laser cutters, engraving machines, 23 and 24 42 * 42mm to 60 * 60mm.

5protect form: overheated protection, overcurrent protection, undervoltage protection, prevention of inversion. The maximum 4. 0a of the eight types of output current. 4the largest 32 divisions of the 6 models are optional; Suitable for 4 wires, 6 wires and 8 wires stepper motor. 1package included: 1 x Stepper Motor Driver. It can be used in various types of machines, pick-place devices and so on.
BrandTwotrees #ad
ManufacturerTwotrees #ad
Part Number2012-02-21



DROK Linear Actuator Control Board, 12A High Power Industrial PWM Electric Motor Drive Regulator Module, 12V 24V 36V Motor Speed Control, DC Motor Controller

DROK #ad - Drok pwm control module is industrial design, with anti-static circuit, transient suppression protection, stable and reliable, undervoltage protection, interface ESD and over-voltage protection.

Similar to l298 drive logic, three lines PWM, IN1, clockwise rotation, in2 to control speed, anticlockwise rotation and brake. Drok motor driver controller input voltage range is DC 9-36V, without heat sink rated current is 12A, with simple cooling rated current is 12-15A. The motor speed controller can provide 5V power supply for the microcontroller or other controllers, with 5V output overcurrent protection, and input signal overvoltage protection. Support full pwm, clockwise rotation or anticlockwise rotation can be control by key directly, PWM effective range is 01% ~ 1000%.
BrandDROK #ad
ManufacturerDROK #ad
Part Number200337