Peachtree Woodworking Supply#ad - These high performance aluminum oxide rolls are designed for all purpose sanding. The grain is resin bonded and have non-loading properties for extra long sanding life. Keep in mind that to achieve the best finish, the last two passes on the material should always be with the grain.
Take the stock out with no more drum adjustment and proceed to sanding normally. This helps prevent tipping or rocking when the piece is being fed through the sander. To avoid too much pressure, with your machine turned off, place the material under the sanding drum, the raise or lower the drum so the drum contacts the material but can still be rotated by hand.
The right amount of pressure you exert on your boards is absolutely critical. Just a slight angle provides you with more effective stock removal.
Made in the usa! the rougher or lower grits like 60 grit can be used for abrasive planing and dimensioning. Angling the stock offers many advantages like less loading due to glue lines, better and more even wear and reduced motor loads. As always, twisted or otherwise imperfect. Too much and it will shorten the life of your abrasive roll, burn the material or cause problems with the motor on your machinery. Straight feed? how about angling your stock feed through the drum instead.
#adJet Tools#ad - Includes a handy storage shelf. Durable and long lasting. Sturdy: provides stability and support for your JET drum sander. Compatability: for use with JET 10-20 and 16-32 drum sanders. Dimensions: 5. 9" h x 19. 3 w x 304" l.