As an Amazon Associate I earn from qualifying purchases.
EANOSIC #ad - This provides longevity and produces cutting results of the highest quality. End mill bits can smoothly upcut groove and slots, finish machining, end milling, cycles and dados with clean edge and bottom, mortises, better than straight bits.
The router bit suit for CNC router and any plunge routers with 1/4" collet. Upcut spiral router bit with 1/4 inch shank and 1/4 inch cutting diameter, 1-1/4 inch cutting length, extra long 3 inch for total length.
And also for carbon steel, cast iron, OAK, MDF, tool steel, aluminum alloy. And nano blue coating with high hardness and heat resistance enables the tool's cutting edge to retain crucial sharpness and lubricity. Cnc spiral bits used for side milling, etc. Solid carbide and nano blue coated: the up-cut spiral router bit is made of solid carbide. Clean surface, neat, no glitches.
SpeTool #ad - Solid carbide spiral router bit with 1/4inch shank and 1/4inch cutting diameter, 1 inch cutting length, 2-1/2 inch for total length. The route bit suit for cnc router and Makita, Bosch, and any brand plunge router with 1/4” collet.
EANOSIC #ad - End mill bits can smoothly upcut groove and slots, end milling, cycles and dados with clean edge and bottom, mortises, finish machining, better than straight bits. And nano blue coating with high hardness and heat resistance enables the tool's cutting edge to retain crucial sharpness and lubricity.
Clean surface, neat, no glitches. This provides longevity and produces cutting results of the highest quality.
Upcut spiral router bit with 1/4 inch shank and 1/8 inch cutting diameter, 1 inch cutting length, extra long 3 inch for total length. Cnc spiral bits used for side milling, etc. And also for carbon steel, cast iron, OAK, MDF, tool steel, soft alloy steel, aluminum alloy. The router bit suit for CNC router and any plunge routers with 1/4" collet.
SpeTool #ad - Spiral bits used for smoothly upcut groove and slots, Plunge Mortises, Cycles and dado with clean edge and bottom, better than straight bits. Solid carbide spiral router bit with 1/4inch shank and 1/4inch cutting diameter, 1-1/4 inch cutting length, 3 inch for total length.
EANOSIC #ad - And nano blue coating with high hardness and heat resistance enables the tool's cutting edge to retain crucial sharpness and lubricity. The 1/4-inch flush trim router bits apply to various wood: such as Plywood, MDF, OAK, and any hardwood working and Long service life for sharp.
The two independent ball bearings with forced on steel collars at the tip of each bit ensures smooth worry free use.
POWERTEC #ad - Includes: 1 solid carbide Router Bit w/ Spiral Up Cut. Shank dimension: bit cuts a 1/4” and has a 1/4” shank | Designed to help eliminate chipping on your workpiece.
Applications: perfect wood cutting tools for an assortment of professional and DIY woodworking projects that require clean and sharp router cuts – Works exceptionally well with woods and hard plastics.
EANOSIC #ad - The cnc end mill router bits apply to various wood: such as plywood, soft alloy steel, and any hardwood working and Long service life for sharp. Solid carbide and nano blue coated: the up and down cut spiral router bit is made of solid carbide.
The router bit suit for CNC router and any plunge routers with 1/4" collet. And also for carbon steel, cast iron, MDF, tool steel, OAK, aluminum alloy. End mill bits can smoothly upcut and downcut groove and slots, better than straight bits.
And nano blue coating with high hardness and heat resistance enables the tool's cutting edge to retain crucial sharpness and lubricity. Clean surface, neat, no glitches. This provides longevity and produces cutting results of the highest quality. Spiral bits used for side milling, finish machining, end milling, cycles and dados with clean edge and bottom, mortises, etc.
Freud #ad - Fast chip removal with excellent quality and long life. Coating for cool cutting edge and superior chip evacuation. Computer-designed flutes provide chip removal required in production settings.
Specs: number of cutters 2, shank dia. Standard uncoated bits. Ideal for grooves and dadoes in all composition materials, plywood, hardwood, and soft wood. Suited for cutting mortises and routing deep blind holes.
EANOSIC #ad - And blue nano coated with high hardness and heat resistance enables the tool's cutting edge to retain crucial sharpness and lubricity. End mill bits can smoothly upcut groove and slots, cycles and dados with clean edge and bottom, mortises, finish machining, better than straight bits.
Cnc spiral bits used for side milling, end milling, etc. The cnc end mill router bits apply to various wood: such as plywood, MDF, tool steel, OAK, soft alloy steel, and any hardwood working and Long service life for sharp.
Upcut spiral router bit with 1/4 inch shank and 1/16 inch cutting diameter, 1/2 inch cutting length, 2 inch for total length. And also for carbon steel, cast iron, aluminum alloy. Clean surface, neat, no glitches. Solid carbide and nano blue coated: the up-cut spiral router bit is made of solid carbide. This provides longevity and produces cutting results of the highest quality.
1. Whiteside Router Bits
#adWhiteside Router Bits RU2100 Standard Spiral Bit with Up Cut Solid Carbide 1/4-Inch Cutting Diameter and 1-Inch Cutting Length
#adWhiteside Router Bits #ad - Industrial Quality. Precision ground for proper balance at high RPM. Whiteside router Bits are made with Premium Carbide.More information #ad
| Brand | Whiteside Router Bits #ad |
| Manufacturer | Whiteside #ad |
| Height | 5.5 Inches |
| Length | 2 Inches |
| Weight | 0.06 Pounds |
| Width | 3 Inches |
| Part Number | RU2100 |
| Model | RU2100 |
More information #ad
2. EANOSIC
#adExtra Long 3 inch Solid Carbide with Nano Blue Coating CNC Router Bits End Mill for Wood Cut, Carving, EANOSIC Upcut Spiral Router Bit 1/4 inch Shank, 1/4 inch Cutting Diameter
#adThe router bit suit for CNC router and any plunge routers with 1/4" collet. Upcut spiral router bit with 1/4 inch shank and 1/4 inch cutting diameter, 1-1/4 inch cutting length, extra long 3 inch for total length.
More information #ad
Up to 2. 5x longer life compared to uncoated bits. The cnc end mill router bits apply to various wood: such as plywood, soft alloy steel, and any hardwood working and Long service life for sharp. And also for carbon steel, cast iron, OAK, MDF, tool steel, aluminum alloy. And nano blue coating with high hardness and heat resistance enables the tool's cutting edge to retain crucial sharpness and lubricity. Cnc spiral bits used for side milling, etc. Solid carbide and nano blue coated: the up-cut spiral router bit is made of solid carbide. Clean surface, neat, no glitches.
| Brand | EANOSIC #ad |
| Manufacturer | EANOSIC #ad |
| Part Number | E202 |
More information #ad
3. SpeTool
#adSpeTool 5Pcs Spiral Router Bits UpCut 1/4 inch Cutting Diameter 1/4 inch Shank HRC55 Solid Carbide CNC End Mill for Woodwork Mortise Slot Carving Engraver
#adMore information #ad
Industrial quality control to ensure best performance. Spiral bits used for smoothly upcut groove and slots, Cycles and dados with clean edge and bottom, Plunge Mortises, better than straight bits. The cnc end mill for plywood, oAK, mdf, and any hardwood working and Long service life for sharp.| Brand | SpeTool #ad |
| Manufacturer | SpeTool #ad |
| Part Number | W04005 |
More information #ad
4. EANOSIC
#adCarving, EANOSIC Upcut Spiral Router Bit 1/4 inch Shank, Extra Long 3 inch Solid Carbide with Nano Blue Coating CNC Router Bits End Mill for Wood Cut, 1/8 inch Cutting Diameter
#adClean surface, neat, no glitches. This provides longevity and produces cutting results of the highest quality.
More information #ad
The cnc end mill router bits apply to various wood: such as plywood, and any hardwood working and Long service life for sharp. Solid carbide and nano blue coated: the up-cut spiral router bit is made of solid carbide. Upcut spiral router bit with 1/4 inch shank and 1/8 inch cutting diameter, 1 inch cutting length, extra long 3 inch for total length. Cnc spiral bits used for side milling, etc. And also for carbon steel, cast iron, OAK, MDF, tool steel, soft alloy steel, aluminum alloy. The router bit suit for CNC router and any plunge routers with 1/4" collet.
| Brand | EANOSIC #ad |
| Manufacturer | EANOSIC #ad |
| Part Number | E201 |
More information #ad
5. SpeTool
#ad1/4 inch Shank 3 inch Extra Long HRC55 Solid Carbide CNC End Mill for Wood Cut, Carving, SpeTool Spiral Router Bits with UpCut 1/4 inch Cutting Diameter
#adMore information #ad
The cnc end mill for plywood, oak, mDF, and any hardwood working and Long service life for sharp. The route bit suit for cnc router and Makita, Bosch, and any brand plunge router with 1/4” collet. Industrial quality control to ensure best performance.| Brand | SpeTool #ad |
| Manufacturer | SpeTool #ad |
| Part Number | W04014 |
More information #ad
6. EANOSIC
#adUpcut Spiral Flush Trim Router Bit, 1/4 Inch Shank Solid Carbide Flush Trim Router Bits Spiral with Nano Coated by EANOSIC 1/4" Shank Up-Cut
#adThe two independent ball bearings with forced on steel collars at the tip of each bit ensures smooth worry free use.
More information #ad
Professional flush trim router bit with top bearing: 1/4” Shank, 1” Cut Length. This provides longevity and produces cutting results of the highest quality. Up to 2. 5x longer life compared to uncoated bits. The spiral router bit suit for CNC router and any plunge routers with 1/4" collet. Industrial quality upcut flush trim router bit: made of solid virgin carbide with NANO blue coated.| Brand | EANOSIC #ad |
| Manufacturer | EANOSIC #ad |
| Part Number | E2109 |
More information #ad
7. POWERTEC
#adPOWERTEC 73002 Solid Carbide Router Bit – Standard ¼ Shank Spiral Bit with Up Cut, ¼ Inch Cutting Diameter and 1-Inch Cutting Length
#adApplications: perfect wood cutting tools for an assortment of professional and DIY woodworking projects that require clean and sharp router cuts – Works exceptionally well with woods and hard plastics.
More information #ad
Premium quality: made with premium carbide and precision ground for proper balance and industrial quality control. Function: spiral bits can be used for upcut grooves and slots, jasper circles, mortises, dados and rabbets – The plunge cut leaves clean edges and a smooth top surface, much better than straight flute bits.| Brand | POWERTEC #ad |
| Manufacturer | POWERTEC #ad |
| Height | 0.69 Inches |
| Length | 2.88 Inches |
| Width | 0.69 Inches |
| Part Number | 73002 |
| Model | 73002 |
More information #ad
8. EANOSIC
#adEANOSIC Spiral Router Bits Up Down Compression Bit 1/4 inch Cutting Diameter with Nano Blue Coated, 1/4 inch Shank Solid Carbide CNC End Mill for Wood Carving Engraver Milling Cutters for Mills Machines
#adThe router bit suit for CNC router and any plunge routers with 1/4" collet. And also for carbon steel, cast iron, MDF, tool steel, OAK, aluminum alloy. End mill bits can smoothly upcut and downcut groove and slots, better than straight bits.
More information #ad
Up & down cut spiral router bit with 1/4 inch shank and 1/4 inch cutting diameter, 1 inch cutting length, 2-1/2 inch for total length. And nano blue coating with high hardness and heat resistance enables the tool's cutting edge to retain crucial sharpness and lubricity. Clean surface, neat, no glitches. This provides longevity and produces cutting results of the highest quality. Spiral bits used for side milling, finish machining, end milling, cycles and dados with clean edge and bottom, mortises, etc.
| Brand | EANOSIC #ad |
| Manufacturer | EANOSIC #ad |
| Part Number | E2106 |
More information #ad
9. Freud
#adFreud 75-102: 1/4" Dia. Up Spiral Bit
#adSpecs: number of cutters 2, shank dia. Standard uncoated bits. Ideal for grooves and dadoes in all composition materials, plywood, hardwood, and soft wood. Suited for cutting mortises and routing deep blind holes.
More information #ad
1/4", overall length 2-1/2", Overall Dia. Freud premier Solid Carbide. Manufacturer's limited lifetime warranty. Use in cnc, hand-held and table-mounted routers. Combines effective chip removal with a cut unmatched by standard straight bits. Freud tico hi-density Carbide = 2X increased life and performance vs. Black i. C. E. Black i. C. E.| Brand | Freud #ad |
| Manufacturer | Freud #ad |
| Height | 1 Inches |
| Length | 1 Inches |
| Weight | 0.08 Pounds |
| Width | 1 Inches |
| Part Number | 75-102 |
| Model | 75-102 |
| Warranty | Freud Limited Tooling Warranty. Contact Freud customer service for more details. 800-334-4494 |
More information #ad
10. EANOSIC
#ad1/16 inch Cutting Diameter Solid Carbide with Blue Nano Coated CNC Router Bits End Mill for Wood Carving, Engraving, EANOSIC Upcut Spiral Router Bit 1/4 inch Shank
#adCnc spiral bits used for side milling, end milling, etc. The cnc end mill router bits apply to various wood: such as plywood, MDF, tool steel, OAK, soft alloy steel, and any hardwood working and Long service life for sharp.
More information #ad
The router bit suit for CNC router and any plunge routers with 1/4" collet. Upcut spiral router bit with 1/4 inch shank and 1/16 inch cutting diameter, 1/2 inch cutting length, 2 inch for total length. And also for carbon steel, cast iron, aluminum alloy. Clean surface, neat, no glitches. Solid carbide and nano blue coated: the up-cut spiral router bit is made of solid carbide. This provides longevity and produces cutting results of the highest quality.
| Brand | EANOSIC #ad |
| Manufacturer | EANOSIC #ad |
| Part Number | E205 |
More information #ad
