Top 10 Solder Wick Braid – Welding Equipment & Accessories

As an Amazon Associate I earn from qualifying purchases.

1. NTE Electronics

#ad

10' Length, 4 Blue.098" Width, NTE Electronics SW02-10 No-Clean Solder Wick

#ad
NTE Electronics #ad - Residue left behind is halide free and non-conductive, so it does not have to be cleaned off the board. Available with standard or anti-static bobbins. 100% copper wick has fine braid design to promote strong capillary action to pull in excess solder. Removes up to four times more solder than conventional wick, and extracts solder much faster than wicks based on Type-R fluxes.
BrandNTE Electronics #ad
ManufacturerNTE Electronics, Inc. #ad
Part NumberSW02-10
ModelSW02-10

2. TOWOT

#ad

Desoldering Wick Used to Remove the Solder and Disassemble Electrical Components, No-Clean Solder Wick BraidW 0.12'' L 9.8', TOWOT Solder Wick

#ad
TOWOT #ad - Thank you! Warranty :if you have any questions, please feel free to contact us at any time. Using flat stitch weaving, fast heat conduction, to promote strong capillary action to pull in excess solder.

Easy to use: the desoldering wicks can provide an easier way to correct mistakes on small PCB boards and will not make damage to the board, clean small components, suitable for re-soldering and desoldering. Low residue design: no-clean solder wick braid will just leave little residues after use and the residues are non-conductive and non-corrosive, no need to waste your time cleaning it.

Extensive applications: the braided solder wicks are suitable for labs, and industrial welding work; And the wicks adopt a fine braid design to promote strong capillary action, school, home, bringing more convenience to your daily work. Quality materials:the braided desoldering wicks are made of 100% copper wires with a fine braid design.
BrandTOWOT #ad
ManufacturerTOWOT #ad
Part NumberTOWOT
ModelW 0.12'' L 9.8'

3. AUSTOR

#ad

Desoldering Vacuum Pump Solder Removal Tool, AUSTOR Desoldering Sucker and 6 Pcs Solder Braid Wick 2.0mm/2.5mm/3.0mm Width, 1.5m Length with Flux

#ad
AUSTOR #ad - High efficiency solder sucker - the desoldering pump designed with double ring and "vacuum" open button, you can remove solder from circuit board effectively by cocking it and pressing the trigger button with one hand.

Desoldering braid wick with rosin - 6 pieces copper solder braid in 3 size, length 1. 5m, width 2. 0mm/2. 5mm/3. 0mm, 2 pieces for each size; geometrically-precise weave, can be used to clean the spare solder on the pin away to avoid short circuit, to meet your various of soldering needs. Wide application - correcting mistakes on small PCB boards, cleaning small components, removing relays and other components from printed circuit boards, re-soldering and desoldering.7

7-in-1 solder removal tool - 1pcs solder sucker and 6pcs solder wicks in 3 size. High quality material - the desoldering pump body made of premium quality ABS material, with non-slip sponge and nylon nozzle, anti-static, heat resistant and durable.
BrandAUSTOR #ad
ManufacturerAUSTOR #ad
Height0.79 Inches
Length7.48 Inches
Width5.12 Inches

4. Herain

#ad

Desoldering Braided Wicks with Flux, Desoldering Wicks Removal Tool Solder Sucker Used to Remove the Solder and Disassemble Electrical Components9.84 ft Length 1, Herain No-Clean Solder Wick

#ad
Herain #ad - It can absorb tin quickly and a large amount of tin, and is dedicated to remove excess solder. 5. Ingenuity quality: 1 piece of no-clean solder braided wick 0078 inch wide, which is sufficient to meet your work requirements. The main board desoldering spot is removed, and it is used with the soldering station.

1. High-quality materials: the desoldering wick is geometrically precisely braided with high-quality copper wire, which is resistant to oxidation and corrosion, has good thermal conductivity, low residual and no halide, and clean tin absorption. 2. Geometric braid design: the solder wick adopts a precise geometric braid design, which ensures a large surface tension and tin absorption ability, and reduces the risk of thermal damage to the circuit board.

If you have any product questions, 9. 84 ft length, you can contact us at any time. 4. Easy to use: the desoldering braid wick is used to absorb excess solder when removing tin, the fine woven design promotes strong capillary action to suck in excess solder. 3. Widely used: no-clean desoldering wick is suitable for welding work in laboratories, electrical appliances, industries, It is suitable for all kinds of electronics, schools and homes, precision instruments and meters.
BrandHerain #ad
ManufacturerHerain #ad
Height0.4 Inches
Length1.85 Inches
Width1.85 Inches
Part Numberxxx-01

5. Hotop

#ad

1.5 meter Length Blue, 6 Pieces Solder Wicks No-Clean Solder Braided Wicks Desoldering Wicks, 0.1 Inch Width

#ad
Hotop #ad - Wide applications: the braided solder wicks are suitable for labs, practical tools to remove solder and correct errors on small PCB boards, home and industry welding work, bringing lots of convenience for your work.

What you get: come with 6 packs of no-clean solder wicks, each wick is about 2. 5 mm/ 01 inch in width and 1. 5 m/ 5 feet long, enough quantity and length for your daily needs. No-clean design: the solder braided wicks will just leave little residues after use and the residues are non-conductive and non-corrosive, you do not need to spending time removing them from the boards. Reliable material: the desoldering wicks are made of copper wires with nice quality, precise weaving design can improve the capillary effect and the redundant solder absorbing ability, increasing your efficiency.

Easy to use: the desoldering wicks can provide a easier way to correct mistakes on small PCB boards and will not make damage to the board, clean small components, suitable for re-soldering and desoldering.
BrandHotop #ad
ManufacturerHotop #ad
Height1.57 Inches
Length2.76 Inches
Width3.94 Inches
Part NumberHotop-Solder Wicks-0140

6. TOWOT

#ad

Desoldering Wick Used to Remove the Solder and Disassemble Electrical Components, No-Clean Solder Wick Braid, TOWOT Solder Wick

#ad
TOWOT #ad - High-quality materials: the desoldering vacuum pump is made of high-quality ABS material, nylon nozzles, coated with a sponge, non-slip and heat-absorbing, anti-static and heat-resistant. Widely used: desoldering wicks and desoldering pumps can be used to correct small board errors on the PCB, re-soldering and desoldering, removing relays and other components from the printed circuit board, etc.

Solder sucker with super suction: with a desoldering pump designed with a double ring and a "vacuum" button, you can easily remove the solder on the circuit board by tilting it up and pressing the button with one hand. Value package: 3-in-1 soldering package, commonly used soldering tools, improve your work efficiency.

Comfortable grip and durable. 30 days no reason to return or exchange, please feel free to contact us if you have any questions!3-in-1 solder set: 2 pcs copper solder braid is made of copper and rosin geometrically accurate braiding, avoiding short circuits, it can quickly absorb and melt to remove excess solder, size length: 1.5m; width: 2. 5mm, when it is heated, Suction Pump Size length: 21cm. To meet your various soldering needs.
BrandTOWOT #ad
ManufacturerTOWOT #ad
Part NumberTOWOT
Model2030-solder sucker

7. Tabiger

#ad

2pcs Solder Braid 2.5mm Width, 1.5m Length- Desoldering Vacuum Pump Solder Remover, Solder Sucker & Desoldering Wick, Tabiger Solder Wick & Desoldering Pump

#ad
Tabiger #ad - Widely used solder remover the desoldering wick & desoldering pump can be used to correct mistakes with small boards on PCBs, remove relays and other components from printed circuit boards, desoldering computer parts such as a motherboard, unsoldering old wire from devices, re-solder mechanical keyboard switches, clean alloy on smd components and more.

Abs body with non-slip sponge and nylon nozzle desoldering pump the body of the desoldering vacuum pump is made of high quality ABS, which make the solder sucker delicate and durable, the nylon nozzle of the solder suck can endure high temperature, make it comfortable to hold, also the covered sponge can absorb sweat and heat, thus it can be used for a long time. One-handed solder sucker with powerful suction whether you are right or left-handed, the desoldering pump designed with double ring double open and "vacuum" button, you can using the desoldering pump by just cocking it and pressing the trigger button with one hand when you are ready, which make the sucking power awesome.

3-in-1 solder removal tool 1pcs desoldering vacuum pumps and 2pcs solder wicks, while the solder wick is better for small amounts of solder, the desoldering pump pulls it away quick, the desoldering wick absorbs solder, a must-have tool for electronics kit, the solder sucker takes up large amounts. Desoldering wick with copper braid 2pcs solder braid with the size 2. 5mm width, this desoldering wick has geometrically-precise weave with copper and rosin, work from the tip of the desoldering wick, once the desoldering wick and the solder has been heated, 1.5m length, the solder braid can quickly absorbed molten solder and left a clean working area.
BrandTabiger #ad
ManufacturerTABIGER #ad
Height0.7 Inches
Length9 Inches
Weight0.17 Pounds
Width4 Inches
Part NumberTB-02-US
Model.

8. MIKIMIQI

#ad

0.1 Inch Width 3 Meter Length, No-Clean Solder Braided Wicks Desoldering Wicks Solder Removal Tool, MIKIMIQI Solder Wicks

#ad
MIKIMIQI #ad - Appropriate size - the size of the solder wick is 2. 5mm x 3m / 01inch x 10 ft. Package include - you will get 1 pack No-Clean Solder Braided Wicks. The color of the label is random.

Solder braided wicks - the solder wicks with no-clean design to make sure that just little residues left behind and the residues are halide free, non-corrosive and non-conductive, greatly saving working time. Applicable occasions - the no-clean desoldering wicks are suitable for industry welding, labs work or home work. Not only improves work efficiency, but also does not damage the PCB board. Premium material - the braided desoldering wicks are made of 100% copper wires with fine braid design. Using flat stitch weaving, fast heat conduction, strong capillary action to pull in excess solder.
BrandMIKIMIQI #ad
ManufacturerMIKIMIQI #ad
Height0.7 Inches
Length2.5 Inches
Width2.5 Inches
Part NumberA12-405

9. Auto Supply Mall

#ad

50ft., Chemtronics Desoldering Braid, Chem-Wik, Rosin, 10-50L 0.10"

#ad
Auto Supply Mall #ad - Ultra-thin desoldering wick. Responds as much as 50% faster than conventional desoldering braids. Overheating minimized by requiring less heat for shorter time. Lighter mass and pure copper braid construction. Better thermal conductivity, even at low temperatures.
BrandAuto Supply Mall #ad
ManufacturerCHEMTRONICS #ad
Weight0.15 Pounds
Part Number10-50L
Model10-50L

10. MG Chemicals

#ad

MG Chemicals 425-NS No Clean Super Wick Desoldering Braid, 0.075" Width x 5' Length

#ad
MG Chemicals #ad - Nsf, nonfood compounds program Listed P1, NSF Registration #144209. Environmentally and PCB safe residues. Conforms to mil-f-14256e rma flux and J-STD-004. Esd electrostatic dissipative safe for 1. 5 m 5 ft bobbins. High purity, oxide-free copper.
BrandMG Chemicals #ad
ManufacturerMG Chemicals #ad
Height0.39 Inches
Length1.57 Inches
Weight0.02 Pounds
Width1.57 Inches
Part Number425-NS
Model425-NS
Warranty[email protected]