Top 10 Router Plate Kit – Routers

As an Amazon Associate I earn from qualifying purchases.

1. JessEm

#ad

JessEm 02120 Mast-R-Lift II Router Lift with Top Plate and 10-Piece Insert Ring Kit with Caddy for Router Plates and Lift Systems 2 Items

#ad
JessEm #ad - Sturdy construction: mast-r-lift ii top plate is hard anodized. Lift shafts: the lift shafts are hydraulically pressed into a larger diameter mount. Attaching the shaft mount to the top plate spreads the lateral load, providing a very rigid and durable mount, standing up to the toughest of routing operations.

Built-in locking mechanism: mast-r-lift ii has a built-in locking mechanism from above the table. Compatibility: with a standard top plate, mast-R-Lift II fits routers with 9-1/4-inch by 11-3/4-inch base using a unique adjustable clamping block system. Hard anodizing is an engineered surface treatment providing a thick abrasion resistant coating and not just a cosmetic treatment that will wear off.

Bundle includes: jessem 02120 mast-r-lift ii router lift with 9-1/4-inch by 11-3/4-inch Top Plate and JessEm 10-Piece Insert Ring Set with Caddy for Router Plates and Lift Systems. Using the same handle you raise and lower your router lift, a simple turn and you are ready for those heavy-duty, long term routing operations.
BrandJessEm #ad
ManufacturerJessEm #ad
Height12.7 Inches
Length18.2 Inches
Weight1.8 Pounds
Width14.2 Inches
Part Number02120-JESSEM_K1
Model02120-JESSEM_K1

2. JessEm

#ad

JessEm 02310 Rout-R-Lift II Router Lift and 02030 10-Piece Insert Ring Kit with Caddy Bundle 2 Items 0231002030

#ad
JessEm #ad - Sturdy construction: all the machined components on the Rout-R-Lift II are CNC machined for durability. Bundle includes: jessem rout-r-lift ii router lift for porter cable, dewalt and Bosch Routers with 3.

5" diameter motors and jessem 10-piece Insert Ring Set with Caddy for Router Plates and Lift Systems. Compatibility: this model is designed for use with porter cable 690/890, DW 610/616/618, Bosch 1617/1618, or any other routers with 3.55" diameter motors. Lift shafts: the shafts are attached to the top plate and fasten in place with more than one screw spreading the lateral load and providing a very rigid and durable mount that will withstand the toughest routing operations. Double-sealed ball bearing: thanks to the a double sealed bearing to the spindle, the Rout-R-Lift II can smoothly raise and lower your motor with ease.
BrandJessEm #ad
ManufacturerJessEm #ad
Height12.4 Inches
Length18.5 Inches
Weight10.7 Pounds
Width14 Inches
Part Number02310-JESSEM_K1
Model0231002030

3. Rockler

#ad

9-1/4'' x 11-3/4'' Large Router Plate – Router Lift Kit For Kreg, Insert Ring, & Set of Hex Keys, Jessum, Router Lift Systems w/Router Plate, Rockler Pro Lift Router Lift, Woodpecker & Peachtree

#ad
Rockler #ad - Optional attachments like the 3-1/4'' pro lift adapter Collar & the 3-1/2'' Pro Lift Adapter Collar allow you to fit other router sizes sold separately. Other plate sizes available separately. What’s included? our pro lift includes 1 rockler pro lift router lift, 1 Router Ring 1-1/2'' I.

D. 1 aluminum router plate 3/8'' thick, 1 Set of hex keys on a key chain. Easy router bit changes: raise your router table fast with the Quick-Gear, then down-shift to the precision gear for fine adjustments—Snap-Lock insert ring for easy bit changes. All this is achieved more quickly, more efficiently, and more intuitively with the router lift plate.

Router table lift: raise your woodworking to a new level with this pro lift router tool. Adjust the height: use the fine adjustment gear to set the final height to within 0001''. Our rockler router lift 9. 25” x 11. 75” plate is ideal for Kreg, Jessum, Woodpecker and Peachtree tables. Fits most routers: this woodworking router table works with router motors with a 4. 2'' diameter 13.
BrandRockler #ad
ManufacturerRockler #ad
Height0 Inches
Length11.02 Inches
Width9.06 Inches

4. Rockler

#ad

Rockler Pro Router Lift 8-1/4'' x 11-3/4'' Plate – Kit Includes Aluminum Router Plate, Set of Hex Keys on Key Chain, Easy to Install Router Lift Systems, Woodworking Router Table, Insert Ring

#ad
Rockler #ad - Use the adjustment gear: once the bit is installed, and click in the insert ring, quickly lower it, and use the fine adjustment gear of our lift pro router to set the final height to within 0.001''. No tools to search for and no screws to lose.

Our router table mounting plate has a snap-Lock insert ring for easy bit changes. What’s included? this router lift kit includes 1 rockler pro lift router Lift, 1 Aluminum router plate 3/8'' thick, 1 Insert ring 1-1/2'' I. D. And 1 set of hex keys on a key chain. No tools to search for: push the button to release the insert ring, then wind the Quick-Gear to raise the bit above the router lift table in just seconds.

Easy bit changes: raise your router table fast with the Quick-Gear, then down-shift to the precision gear for fine adjustments. Woodworking router lift: two patent-pending features raise the Rockler router table insert plate with lift into a class of its own: ultra-fast ''Quick-Gear'' height adjustments and ''Snap-Lock'' tool-free insert ring changes.
BrandRockler #ad
ManufacturerRockler #ad
Height0.01 Inches
Length11 Inches
Width1 Inches

5. O'SKOOL

#ad

O'skool Router Lift Systems for 3-1/2" Diameter Motors, 9-1/4'' x 11-3/4'' Plate 5-Piece Insert Ring Kit

#ad
O'SKOOL #ad - After adjusting the router lift to the needed height, lock the carriage to preventthe router motor from shifting while in use. There are precise centerlines on both sides of the router plate that can help you find the center positions of the bit quickly and effectively.

Designed for routers with 3-1⁄2-in. Dia of body. Please check the size of our Router Lift to make sure if it matches your router motor and router table. So you can make exact bit height changes. Leveling screws can be adjusted the top and bottom flatness of the router plate and router table. Suitable for a variety of router tables: use cam wheels to adjust the gap between router table and router table top opening. Applicable models :. Quick-cchange router bit : use the router lift’s included crank handle to adjust the height of the router bit easily and precisely from above the table.

Aluminum router plate dimensions are 11-3/4" x 9-1/4" x 3/8"thick, 19. 13/4” radius. The screws of oval mounting holes can be adjusted to suitable positions according to the locations of the router table style holes, then lock them in place. Rotate the hex hole of the micro-adjustment dial to lift or lower the carriage as needed to position the router bit, every full revolution of the adjusting crank moves the carriag and changes the height of the router bit by +- 0
BrandO'SKOOL #ad
ManufacturerO'skool #ad
Part NumberRTS05
ModelRTS05

6. Deadwood Crafted Tools

#ad

2-5/8, 3-7/8, DCT Universal Router Table Saw Insert Base Plate Kit, 1-1/4 Inches – Cutter & Porter-Cable Template Guide

#ad
Deadwood Crafted Tools #ad - Easy to install: 9-inch x 12-inch 22. 9cm x 305cm plate with pre-drilled table mounting holes; includes magnets and adjusting screws for securing and leveling the plate; 2 removable concentric rings allow for easy alignment when installing your router and give three different bit openings 3-7/8, 2-5/8, 1-1/4-inch 9.

8cm x 6. 7cm x 3. 2cm; underside is marked for centering the router prior to drilling. Fits most cutters: 3/8-inch thick 1cm phenolic router plate supports any router with removable baseplate; 3 snap out bit ring openings 3-7/8 inches black for large raised panel cutters, 2-5/8 inches yellow for medium to large cutters, 1-1/4 inches red for small cutters and Porter-Cable template guides; Steel starting guide pin allows routing curved work. Build a table-mounted router: the dct universal router table saw insert base plate kit, 3-7/8, 2-5/8, 1-1/4” Inches – Cutter & Porter-Cable Template Guide lets you build your own table-mounted router safely so you can easily lift the router out of the table to change bits and safely operate; Gives you a mobile machined surface.

Contents: package includes everything you need to mount your router to a table; 1 router plate, 4 magnetic holders, 1 Allen wrench hex key, and 4 screws; Router required, 1 guide pin, not included. Built to last: constructed from durable phenolic plastic to securely hold any router without flexing or warping when storing your router on not inside the table; Plastic material makes it easy to drill holes for a custom router fit.
BrandDeadwood Crafted Tools #ad
ManufacturerDeadwood Crafted Tools #ad
Height10.3 Inches
Length0.6 Inches
Weight1.06 pounds
Width17.7 Inches
Part Number9183
WarrantyThis product has a manufacturer warranty against defects in materials and workmanship for a period of ONE (1) YEAR from the date of original retail purchase. See our Seller Return Policy for more details.

7. MLCS

#ad

MLCS 9338 All-In-one Router Plate Kit

#ad
MLCS #ad - 3 bit opening sizes. Magnetic plate hold-down. Easy installation. Everything you need to mount Your Router to a Table! Strong, durable phenolic plastic will hold any router.
BrandMLCS #ad
ManufacturerMLCS #ad
Weight1 Pounds
Part Number9338
Model9338
Warranty3 Year Warranty on all merchandise. All products are guaranteed against defects in workmanship ans materials.

8. PORTER-CABLE

#ad

7-Amp 557, PORTER-CABLE Plate Joiner Kit

#ad
PORTER-CABLE #ad - Includes 4-inch diameter blades for standard biscuit cutting. Bale handle attached to fence, not motor, for greater stability and added control during cuts.

1-inch o. D. Precise micro height-adjustment knob. Dust port of the plate joiner accepts standard bag or can be connected to a vacuum. Spindle lock feature allows for single wrench bit changes. The joiner tool has 7. 0 amp, 10, ac only, 120 v, 000 rpm. Lock-on trigger. Porter-cable joiner fence tilts from 0 degree to 135 degree with positive adjustable stop at 90 degree. Seven-position rotating depth stop for FF, Simplex, Duplex, #10, #20, #0, and Max #6 biscuits. Height scale accurate at any angle.
BrandPORTER-CABLE #ad
ManufacturerPORTER-CABLE #ad
Height8 Inches
Length16.38 Inches
Weight14.5 Pounds
Width10.75 Inches
Part Number557
Model557
WarrantyManufacturer

9. Jasper Tools

#ad

Pivot Plate, Fits Most Popular Routers, Mounting Hardware, Storage Case, Includes Carbide Bit, Jasper 240 PRO Circle Cutter Router Jig Kit Cut Perfect Circles 1 to 18 3/16 inch, Eye/Ear Protection

#ad
Jasper Tools #ad - The kit includes the jasper 240 pro circle cutter allows you to cut 276 different-sized, precise, perfect circles from 1” to 18 3/16” D. The 240 pro circle cutter router jig is made from high-quality, with registration, industrial grade polycarbonate and, is guaranteed for life.

Includes all hardware and mounts quickly to fit over 47 different models of plunge routers from popular brands like PORTER CABLE, MAKITA, DEWALT, RIGID, BOSCH, and many more. The circle cutting router guide kit includes a Jasper calibration disc for precise centering, as well as additional centering and pivot pins to ensure perfect circle cutting paths. Also included 1 m350 blemish free pivot plate, carrying and storage case, ear & eye protection, 1 601 carbide bit, double sided tape, screws and hardware kit.
BrandJasper Tools #ad
ManufacturerJasper Precision Tools #ad
Part NumberM240PK

10. Makita

#ad

With Plunge Base, Makita RF1101KIT2 2-1/4 HP* Router Kit

#ad
Makita #ad - Soft start feature for smoother start-ups. Powerful 11. 0 amp motor delivers 8, 000-24, 000 RPM for the most demanding applications. Low noise 81dB and low vibration for operator comfort. Electronic speed control maintains constant speed under load. Variable speed control dial enables user to match the speed to the application.
BrandMakita #ad
ManufacturerMakita #ad
Height14.5 Inches
Length7 Inches
Width22 Inches
Part NumberRF1101KIT2
ModelRF1101KIT2
Warranty1 Year