Top 10 Rabbeting Router Bits 1/2 Shank – Edge Treatment & Grooving Router Bits

As an Amazon Associate I earn from qualifying purchases.

1. SellyOak

#ad

1/2" Interchangeable and Adjustable Bearings, 7/16", 1/4", 5/16", 3/8", 1/2 Inch Shank Rabbet Router Bit with 6 Bearings Set, SellyOak Multi Rabbeting Router Bit Set for Multiple Depths 1/8"

#adSellyOak #ad - Warm reminder for our customers: Please check the shank size for your router takes to avoid ordering in mistake. Cutting depth 1/8 to 1/4-inch: rabbet router bit set with Interchangeable bearings to cut rabbets of different depths producing smooth cuts on both surfaces by replacing bearing.

Specify for rabbet cuts in the wood work project for any art or craft. All dimensions and weight are in description below. For cutting various materials: this rabbet router bit can be used for hard wood, softwood, synthetic board and so on, but to avoid processing materials that are too hard. Wide in use: reliable rabbet router bit for DIYer and 100% satisfy to experienced woodsmith. Premium material: rabbet router bit, Solid Hardened Steel Bodies with carbide blades, which run effortlessly through all Composition Materials.

Brand	SellyOak #ad
Manufacturer	PUSU Electrical Co., Ltd. #ad
Part Number	RT-R002

2. WSOOX

#ad

1/4", 1/2" Bearings, 3/8", WSOOX 1/4 Inch Shank Rabbet Router Bit Set, 7/16", 5/16", 3 Pieces Rabbeting Router Bit with 6 Bearings Set 1/8"

#adWSOOX #ad - Router bit set3 pcs rabbet router bit with 1/4" shank. Please note: the short clamping of this router bit might cause bend. Compatible machinesuse on cnc and other automatic routers as well as hand-held and table-mounted portable routers.

3 different cutting height:1/4", 7/16", 1/2", 3/16", 3/8", 1/8", 1/4", 5/16", with 6 Interchangeable bearing used for cut different depths 1/2", 3/8", 1/16". It can cut the wood smoothly and not easily broken. Teflon coatingbaking heat-resistant coating to prevent accumulation of wood chips, resin and asphalt, good wear resistance and long service life. Quality bladethe blade is made of high-quality YG8 carbide steel, which is sharp, durable and impact resistance. Applicable materialthis professional rabbeting bit set suitable for wood, plywood, MDF, particle board, acrylic and different wood composites.

Brand	WSOOX #ad
Manufacturer	WSOOX #ad
Part Number	WY743B
Model	WY743B

3. Yonico

#ad

Yonico Rabbet & Bearing Router Bit Set Large 1/2-Inch Shank 14706

#adYonico #ad - Premium c3 micro-grain tungsten carbide blades for a sharper & longer lasting edge. Cut 1" rabbets in a variety of depths up to 3/4" deep. For use on table mount and handheld router. Includes 1 large rabbet router bit and 6 bearings. Silver induction brazing for maximum strength and durability.

Brand	Yonico #ad
Manufacturer	Yonico #ad
Height	3 Inches
Length	6.25 Inches
Weight	1.3 Pounds
Width	5.25 Inches
Part Number	14706
Model	14706

4. SellyOak

#ad

SellyOak Multi Rabbeting Router Bit Set for 3/8 Cutting Depth, Multiple Depths 1/8", 5/16", 1/4 Inch Shank 4-Wing Rabbet Router Bit with 6 Bearings Set, 7/16", 1/2" Interchangeable and Adjustable Bearings, 1/4", 3/8"

#adSellyOak #ad - Wide in use: reliable rabbet router bit for DIYer and 100% satisfy to experienced woodsmith. Premium material: rabbet router bit, Solid Hardened Steel Bodies with carbide blades, which run effortlessly through all Composition Materials.

All dimensions and weight are in description below. Various cutting depth: rabbet router bit set with Interchangeable bearings to cut rabbets of different depths producing smooth cuts on both surfaces by replacing bearing. Warm reminder for our customers: Please check the shank size for your router takes to avoid ordering in mistake. Specify for rabbet cuts in the wood work project for any art or craft. For cutting various materials: this rabbet router bit can be used for hard wood, synthetic board and so on, softwood, but to avoid processing materials that are too hard.

Brand	SellyOak #ad
Manufacturer	Sellyoak #ad
Part Number	RT-4W-3/8

5. Whiteside Router Bits

#ad

Whiteside Router Bits 1955 Multi Rabbet Set Carbide Tipped 1-3/8-Inch Large Diameter and 1/2-Inch Cutting Length

#adWhiteside Router Bits #ad - Can cut the following size rabbets using the bearings included:Flush Trim, 1/4", 3/8", 3/16", 5/16", 7/16", 1/8", 1/2". Hex wrench is included. 1/2" x 1/2" is the maximum rabbet size. Large diameter: 1 3/8", cut length: 1/2", Shank Diameter: 1/2". Set is organized in a 4'x4'x3' box.

Brand	Whiteside Router Bits #ad
Manufacturer	Whiteside #ad
Height	6 Inches
Length	3 Inches
Weight	1 Pounds
Width	4.5 Inches
Part Number	1955
Model	1955

6. CMT

#ad

CMT 835.501.11 Variable Depth From 1/8-Inch to 1/2-Inch, 1/2-Inch Shank Rabbeting Router Bit Set, 1/2-Inch Cutting Height

#adCMT #ad - Bit, bearings and hex key are included. Anti-kickback design. For rabbeting of different size on wood and wood composites. 2 sinterhip hi-density Industrial Chrome Carbide for long-lasting performance. Cutting depth 1/8 to 1/2-inch by replacing bearing, 1-3/8-Inch Diameter & 3/4-Inch Cutting Length.

Brand	CMT #ad
Manufacturer	CMT #ad
Height	1.38 Inches
Length	2.34 Inches
Weight	0.85 Pounds
Width	1.38 Inches
Part Number	835.501.11
Model	835.501.11
Warranty	Limited lifetime warranty: cmt carbide and carbide-tipped router bits and saw blades are designed, engineered and manufactured to uncomprimising standards for optimum cutting performance and maximum service life. If for any reason you are not satisfied with the performance of your cmt router bits, and the bits were used for their recommended applications, you can return them to cmt for a full replacement. Warranty excludes dull, misused, damaged, and/or resharpened bits.

7. YAKAMOZ

#ad

3/8", 5/16", Yakamoz 1/2 Inch Shank Rabbeting Router Bit Rabbet Router Bit Set with 6 Bearings Set for Multiple Depths 1/8", 1/4", 1/2", 7/16"

#adYAKAMOZ #ad - 1/2 inch shank industrial quality Router Bits, Build-up & Heat Resistant Teflon Coating. Made of cemented Carbide and long-lasting performance. Interchangeable bearings to cut rabbets of different depths: 1/8, 3/8, 1/4, 5/16, 7/16 and 1/2-Inch. Solid hardened Steel Bodies with Anti-Kickback Design. For rabbeting of different size on wood and wood composites.

Brand	YAKAMOZ #ad
Manufacturer	Yakamoz #ad
Weight	0 Pounds
Part Number	GY0127

8. HOHXEN

#ad

3/4",7/8", 1-1/8", 1/2", HOHXEN Rabbet Router Bit 1/2 Inch Shank with 6 Bearings Set Rabbeting Router Bits, Adjustable Bearings 3/8", 5/8"

#adHOHXEN #ad - Multi-purpose use the rabbet router bits is suitable for all range's router such as handheld router and table router. The router bit is packed in a plastic box for easy storage and carry. Premium c3 micro-grain tungsten carbide blades provides increased strength and utmost resistance.

Bearing dia: 3/8", rabbet cutting depths: 1/2", 3/4", 7/16", 5/16", 1/2", 3/8", 7/8", 5/8", 1-1/8". We offer "24 month" warranty on item that confirm to be manufacturer defect. Perfect after-sale service we always provide good customer service and purchase experience to our customers. If you have any questions, please email to our after-sale team, we will try our best to solve your problem. Please avoid cutting ferrous metal and non wood materials, etc. Size of the rabbet router bit the router bits shank: 1/2", 1/4", cutting height: 1/2", 1/8".

Note: the short clamping of this product might cause bend. You can complete your work accurately, and satisfy your pursuit of exquisite DIY while you use it easily. For cutting various materials suitable for solid woods, iron, laminate, MDF, plywood compact panel, sand, particle board, such as:steel, acrylic and etc. Build up with heat resistant Teflon coating which can reduce resin build-up for fast and easy cleaning. Professional quality rabbet router bit the router bit cutter material is YG6 solid hardened steel with anti-kickback design.

Brand	HOHXEN #ad
Manufacturer	HOHXEN #ad
Part Number	WJ-HO-5017-1/2-FBA

9. Eyech

#ad

1/4", 3/8", 1/2", Eyech 1/4 Inch Shank Rabbet Router Bit Set with 6 Bearings Rabbeting Router Bit Bearings Set for Multiple Depths 1/8", 7/16", 5/16"

#adEyech #ad - Use on hand-held and table-mounted portable routers. Solid hardened steel bodies with anti-kickback design. 6 bearings cutting depths: 1/8", 1/4", 5/16", 3/8", 7/16" and 1/2". Cuts all composition materials, plywoods, hardwoods, softwoods and so on. Interchangeable bearings to cut rabbets of different depths.

Brand	Eyech #ad
Manufacturer	Eyech #ad

10. CHoiKWong

#ad

5/16", 1/16" Interchangeable Bearings, 1/8", 7/16", CHoiKWong Carbide Tipped Rabbeting Router Bit Set for Multi Depths 1/2", 1/4", 1/4 Inch Shank Rabbet Router Bit with 6 Bearings, 3/16", 3/8"

#adCHoiKWong #ad - Note: the short clamping of this product might cause bend. Plus a turning electrical and mechanical wood carving milling chuck connector from 1/2" to 1/4". High-quality service if you have any problems using our product, Please contact us immediately, we will provide you with a solution that 100% satisfaction you.

Avoid cutting metal and non-wood materials such as steel, particle board, plywood, MDF, iron and sand. Applicable equipment: use on cnc and other automatic routers as well as hand-held and table-mounted portable routers. Durable c3 carbide tipped, balanced craftsmanship and solid hardened steel body with clever Anti-Kickback design for sharp and long lasting cutting and precision grinding for proper balance at high RPM creates smooth delicate cuts in the project reduce debris and burrs.

Versatile router tool rabbet router bit 1/4" shank, 3/16", 2 cut height 1/2" and 3/8", with 6 interchangeable bearing used for cut different depths 1/2", 3/8", 1/8", 7/16", 5/16", 1/4", 1/16" . Such as woodworking engraving machines, trimming machines, etc. Gift. Widely applications this professional rabbeting bit set suitable for wood, acrylic and different wood composites.

Brand	CHoiKWong #ad
Manufacturer	CHoiKWong #ad
Part Number	2983