Top 10 Nail Puller Claw – Pry Bars

As an Amazon Associate I earn from qualifying purchases.

1. Estwing

#ad

Estwing Pro Claw Nail Puller, PC210G, 9" Pry Bar with Forged Steel Construction & No-Slip Cushion Grip

#ad
Estwing #ad - Forged in one piece – the most durable, longest lasting striking tools available. Precision thin claw – gives you access into hard-to-reach places. Removes headless nails – claw designed allow for headless nail removal with minimal wood damage. High leverage design – rounded head for added torque & increased leverage. No-slip cushion grip – comfortable, durable vinyl grip for a strong hold in all conditions.
BrandEstwing #ad
ManufacturerEstwing #ad
Height9.13 Inches
Length9 Inches
Weight0.41 Pounds
Width2.13 Inches
Part NumberPC210G
ModelPC210G

2. Crescent

#ad

Crescent Flat Pry Bar

#ad
Crescent #ad - Durable high visibility Red finish is corrosion-resistant. Nail slot in both claw and pry ends for access to pulling. Striking face has ground surface for precision nailing. Precision ground ends for nail pulling with less material damage.
BrandCrescent #ad
ManufacturerCooper Tools #ad
Height0.75 Inches
Length11.5 Inches
Weight0.35 Pounds
Width3.25 Inches
Part NumberMB8
ModelMB8

3. DEWALT

#ad

Dewalt DWHT55524 10 in. Claw Bar

#ad
DEWALT #ad - Nail digger exposes the head of a flush nail so it can be pulled with minimal damage to the wood. I-beam shaft provides strength without adding weight. Pointed penetration end digs into material to remove embedded nails. Extra wide strike surface helps user accurately strike the bar to get under a nail or behind material to pry.
BrandDEWALT #ad
ManufacturerDewalt #ad
Height2 Inches
Length12 Inches
Weight0.82 Pounds
Width3.5 Inches
Part NumberDWHT55524
ModelDWHT55524

4. Spec Ops

#ad

SPEC-D10CLAW Tools 10" Nail Puller Cats Paw Pry Bar, High-Carbon Steel, 3% Donated to Veterans Black, Spec Ops

#ad
Spec Ops #ad - 3% of all spec ops tools purchases are donated to veteran and first responder causes. Up to 20% lighter, carbon-steel design for sniper control. 100’ drop-tested to ensure durability on the harshest jobsites. Precision-honed claws remove embedded or headless nails with minimal damage. Compatible with SRS Retention Lanyards for added safety. Two nail pullers for added versatility. Dual strike zones for rapid nail extraction.
BrandSpec Ops #ad
ManufacturerSpec Ops Tools #ad
Part NumberSPEC-D10CLAW
ModelSPEC-D10CLAW
WarrantyLimited Lifetime Warranty: [email protected]

5. Estwing

#ad

12" Double-Ended Pry Bar with Straight & Wedge Claw End, Estwing Nail Puller, DEP12

#ad
Estwing #ad - Built for the pro – carpenters, demolition crews, framers, roofers, wood workers, tradesmen & serious DIYers. Forged in one piece – the most durable, longest lasting striking tools available. Perfect for window & door trim, molding and baseboard. Removes headless nails – claw designed allow for headless nail removal with minimal wood damage. Work in small spaces – the precision thin claw allows the user to access hard-to-reach and confined places. High leverage design – rounded head for added torque & increased leverage.
BrandEstwing #ad
ManufacturerEstwing #ad
Height11 Inches
Length11 Inches
Weight1.21 Pounds
Width1.1 Inches
Part NumberDEP12
ModelDEP12
WarrantyEstwing warrants its all steel hammers against failure in normal use, but does not warrant its tools against misuse, abuse or wearing out. Misuse could include, but are not limited to the following: a). Striking other hardened objects such as other tools, hardened nails, drills or chisels, etc. b). Pulling (attempting to withdraw) hardened nails, screws or nail sets. c). Filing of nick in claws or handles

6. Estwing

#ad

Estwing Handy Claw Nail Puller, 10" Pry Bar with Forged Steel Construction & Vinyl Cushion Grip, HC-10

#ad
Estwing #ad - Curved claw leverage – added torque when pulling and prying nails or boards. Removes headless nails – claw designed allow for headless nail removal with minimal wood damage. Built for the pro – framers, roofers, contractors, carpenters, tradesman & serious DIYers. Forged in one piece – the most durable, longest lasting striking tools available. No-slip cushion grip - Comfortable, durable vinyl grip for a strong hold in all conditions.
BrandEstwing #ad
ManufacturerEstwing #ad
Height0.88 Inches
Length10 Inches
Weight1.01 Pounds
Width1.75 Inches
Part NumberHC-10
ModelHC-10

7. WORKPRO

#ad

WORKPRO 2-Piece Nail Puller Set, Cats Paw Nail Remover, 12” Pry Bar, 8” Mini Crowbar, for Kitchen Remodel, Multi-sided Forged Steel Made, Prying Apart Baseboard, Claw Bar

#ad
WORKPRO #ad - The angled edge is fit for pulling apart walls, wood panels and removing moldings, prying off decorative strips, nails & trim, tiles, and more. Hexagonal shaft has six sides for better grip and is great for levering. It is recommended that you clean the surface and dry it after use, which will help to extend the service life of the crowbar.

It can be very useful when you’re recycling used pallets or other salvaged wood. Convenience: crowbar complies with relevant environmental protection requirements and can be used with confidence. Rust-proof design: surface of pry bar is coated with anti-rust oil, which can effectively avoid surface rust and have a longer service life. The bending strength of 12" crowbar is greater than 1200 inch pounds.

The bending strength of 8" crowbar is greater than 500 inch pounds. High hardness: crowbar is forged from high-quality carbon steel, with high hardness & durability. The head of crowbar allows for striking as a hammer. 8" crowbar weighs 180 grams, and 12" crowbar weighs 420 grams. Versatile construction: the design of l-shaped crowbar helps increase torque, and with the help of leverage, it is convenient to use. Application: polished pry bar end can be wedged into narrow spaces.
BrandWORKPRO #ad
ManufacturerWORKPRO #ad
Part NumberW002002AE

8. BAKUMA

#ad

BAKUMA Nail puller Kajiya 280 Japan Import

#ad
BAKUMA #ad - Note : do not point the cutting edge at anyone. Please do not use it for any purpose other than its intended purpose. Please place it in a conspicuous place during use and be careful of safety. Product size approx. It is highly evaluated all over the world for its high safety and quality. A product of bakuma, a japanese company that manufactures and sells housing-related products and carpentry tools. Material : S55C. Keep out of the reach of infants and children. Mm : 280x67x20 Size : 280mm.
BrandBAKUMA #ad
ManufacturerBAKUMA #ad
Height0.79 Inches
Length11.02 Inches
Weight0.8 Pounds
Width2.64 Inches
Part Number280ミリ
Model280ミリ

9. Dead On Tools

#ad

Silver, Dead On Tools EX9CL 10-5/8-Inch Exhumer Nail Puller

#ad
Dead On Tools #ad - Trusted and used by experts. Proven and tested for durability and function in real world conditions. A true performance product. Designed with the skilled craftsman in mind. Quality assured products.
BrandDead On Tools #ad
ManufacturerDead On Tools #ad
Height3 Inches
Length7 Inches
Width3 Inches
Part NumberEX9CL
ModelEX9CL

10. Great Neck

#ad

Great Neck Saw TL4C Tack Lifter, color may vary

#ad
Great Neck #ad - 1/4 in. Chrome plated to Resist Rust. Chrome vanadium Steel for Strength and Durability. Quality Acetate Handle. Thick heavy Duty Shank.
BrandGreat Neck #ad
ManufacturerGreat Neck #ad
Height1 Inches
Length1 Inches
Weight0.01 Pounds
Width1 Inches
Part NumberTL4C
ModelTL4C