As an Amazon Associate I earn from qualifying purchases.
Ryf #ad - Only mark two points for drilling holes, and screw each mounting bracket into its respective place. Easy to install lid support --the lid hinge is used for side mounting and top mounting.
Durable lid support hinge--made of zinc ally in satin Nickel, Lid support can be mounted for flap support or bar counter function. Max weight lid hinge--support 40lbs when use 2 pcs lid stays, Lid support hinge can be mounted on the left or right side.
douper #ad - And must with a 9 inch clearance. Gently close design -- excellent safety solution for heavy hinged lids, lids will lower slowly and gently to avoid smashing fingers. Note: no adjustments on placement measurements of the hinge mounted on side board.
Never worry again about having to prop the lid open. Strong enough -- douper 200n heavy duty gas struts can support maximum 30lbs lid and lower gently; Weight support will be doubled with 2 hinges 60lbs/ 2pcs.
Warm tips -- douper hinges will not applicable with the lid at width more than 50” and height over 25”. 75°-105° open angle -- each lid hinge can be used for right or left hand mounting, keep the hinge installed for 75°-105° adjustable opening angles, depending on actual situation. Holds lid open -- these hinges will hold your lid open until you push it down.
SafeStay #ad - Easy install instructions - easy to follow installation instructions ensure a perfect install the first time! Lid stay can be installed on either the left or the right side.
Small compact design - the compact design allows for installation in tight fit areas. This lid stay will hold the lid open until you are ready to close. Holds lid open - never worry again about having to prop the lid open.
RUYUFE #ad - Lid stay with soft close for toy box-- the lid stay is made of nickel plated steel and plastic, and 2 pcs lid-stay support the range of door weight 12-21 lbs, Height 18-19 inch. Easy to follow installation instructions ensure a perfect install the first time! Lid stay can be installed on the left or on the right.
Easy to install lid support-- updated install instructions can be downloaded in Amazon page. Compact design of lid stay hinge -- the compact design allows for installation in tight fit areas.
The hinge will not applicable with the lid at width more than 27’’ and height over 18’’. Keep lid hinge stay opening, wide usage -- never worry again about having to prop the lid open. Lid stay slow closing -lid stay support built-in hydraulic dampening device. This lid support will hold the lid open until you are ready to close. Doors and lids will come down slowly and softly which eliminates slamming doors or smashed fingers.
MORINBO #ad - Know before purchasing updated manual can be downloaded in amazon page. Easy to follow installation instructions ensure a perfect install the first time! Each lid hinge can be used for right or left hand mounting.
Sturdy lid stay with soft close excellent safety solution for toy box lid and kitchen cabinets, your lids will lower slowly and gently to avoid smashing fingers. Compact design of lid stay hinge the compact design allows for installation in tight fit areas.
And per lid-stay support the range of door weight 3-10 lbs, Height 18-19 inch. They can support lid weight from 5lbs to 10lbs and lower gently; Weight support will be doubled by using 2 lid supports 6lbs-20lbs. The lid hinges supports opening the lid at a maximum Angle of 105 degree.
RUYUFE #ad - Weight capacity– 25-50lb lid support hold 12lbs-22lbs/1pc. Easy to install only 5 minute–each lid hinge can be used for right or left hand mounting, easy to install by following the placement measurements of the instructions.
Soft close safety hinge -- excellent safety solution for heavy hinged lids, lids will lower slowly and gently to avoid smashing fingers. Lid support hinge is suitable for doors of cabinet, toy box, wardrobe, kitchen, storage chest cupboard and so on.2
Lid will slow the descent when the opening angle is less than 70°. Durable heavy duty hinge--lid support hinge is made of zinc alloy, multi-layer electroplating solid process casting, fine workmanship. Lid stay hinge rotate one way to lock lid open- soft close hinges will keep your lid open until you push hinge down.
VOCOMO #ad - Easy to install - easy to follow graphic installation instructions ensure a perfect install the first time. Small compact design - The compact design allows for installation in tight fit areas. Lid support hinge - never worry again about having to prop the lid open.
douper #ad - 75°-105° open angle -- each lid hinge can be used for right or left hand mounting, keep the hinge installed for 75°-105° adjustable opening angles, depending on actual situation. Note: no adjustments on placement measurements of the hinge mounted on side board.
And must with a 9 inch clearance. Never worry again about having to prop the lid open. Hinges will not work if your lid doesn’t match specified dimension and weight requirement.
Gently close design -- excellent safety solution for heavy hinged lids, lids will lower slowly and gently to avoid smashing fingers. Warm tips -- douper hinges will not applicable with the lid at width more than 50” and height over 25”.
RUYUFE #ad - Durable material -- the up-grated version has the advantages of strong bearing capacity, Metal connector instead of plastic clip. Never worry about having to support the lid anymore. Made of premium quality zinc alloy with maximum corrosion resistance and durability the lid stay hinges guarantee high performance.
Easy to install – only following the placement measurements on the instructions, you can easy to install lid stay.
Keep the lid open - the lid hinge will hold the lid open until you want to close. Weight capacity—max weight support 50lbs/2 pcs, Lid support hinge can be mounted on the left or right side. You will get 2pcs lid stays, Allen wrench and exclusive redesign Installation instruction in package. Heavy toy chest lid to prevent fingers from getting smashed.
VOCOMO #ad - After installing the hinge, please tighten the mechanism into Allen wrench hole to prevent lid from slamming shut. Adjustable tension - adjust tension with Allen wrench to fit for lids with different weight.
Gentle slow close design - lids will lower slowly and gently to avoid crushing even the smallest of fingers. No risk purchase - We provide worry-free lifetime warrantyno man-madeand friendly customer service. The weight of the lid cannot exceed 50lbs.
1. Ryf
#adRUYUFE Lid Support Hinge Lid Stay with Soft Close Toy Box Hinge Support Drop Lids of Cabinets Kitchen Support 40lb/2pcs
#adDurable lid support hinge--made of zinc ally in satin Nickel, Lid support can be mounted for flap support or bar counter function. Max weight lid hinge--support 40lbs when use 2 pcs lid stays, Lid support hinge can be mounted on the left or right side.
More information #ad
Wide application--perfect as toy box hinges, Lid stay support good for kitchen cabinet door cupboard and window seat, wardrobe. Installing screws and Allen wrench in package. Soft close lid stay-every lid support can be adjusted in largest 75°、90° and 100° and used for Right or Left Hand mounting.| Brand | Ryf #ad |
| Manufacturer | Ryf #ad |
| Height | 0.15 Inches |
| Length | 8 Inches |
| Width | 1 Inches |
More information #ad
2. douper
#adDouper 200N Gas Struts Heavy Duty Soft Close Lid Support Hinges Automatic Slow Lowering Safety Pneumatic Lid Lifters Gas Springs Pack of 2
#adNever worry again about having to prop the lid open. Strong enough -- douper 200n heavy duty gas struts can support maximum 30lbs lid and lower gently; Weight support will be doubled with 2 hinges 60lbs/ 2pcs.
More information #ad
Hinges will not work if your lid doesn’t match specified dimension and weight requirement. Warm tips -- douper hinges will not applicable with the lid at width more than 50” and height over 25”. 75°-105° open angle -- each lid hinge can be used for right or left hand mounting, keep the hinge installed for 75°-105° adjustable opening angles, depending on actual situation. Holds lid open -- these hinges will hold your lid open until you push it down.
| Brand | douper #ad |
| Manufacturer | Douper #ad |
| Height | 1 Inches |
| Length | 13 Inches |
| Width | 1 Inches |
| Part Number | DP057-TATAMI |
More information #ad
3. SafeStay
#adEasy to Install, Lid Support for Toy Box and Chest, SafeStay Lid Stay 105 Degree Open with Soft Close
#adSmall compact design - the compact design allows for installation in tight fit areas. This lid stay will hold the lid open until you are ready to close. Holds lid open - never worry again about having to prop the lid open.
More information #ad
Gentle slow close design - Lids will lower slowly and gently to avoid crushing even the smallest of fingers. 100% money-back guarantee - if for whatever reason you are unhappy with the product we will refund you, no questions asked! The lid stay allows the lid to open at a maximum 105 degree angle.| Brand | SafeStay #ad |
| Manufacturer | SafeStay #ad |
| Height | 0.5 Inches |
| Length | 4.5 Inches |
| Width | 3.1 Inches |
More information #ad
4. RUYUFE
#adLid Stay 105 Degree Open with Soft Close, Lid Support for Toy Box and Upward Top-Opening Flap Doors Pack of 2
#adEasy to install lid support-- updated install instructions can be downloaded in Amazon page. Compact design of lid stay hinge -- the compact design allows for installation in tight fit areas.
More information #ad
The lid hinges supports opening the lid at a maximum Angle of 105 degree. This lid stay is deal for upward opening flaps, vertical cabinet doors and storage box, such as toy boxes and vanity lids, cabinetry. The hinge will not applicable with the lid at width more than 27’’ and height over 18’’. Keep lid hinge stay opening, wide usage -- never worry again about having to prop the lid open. Lid stay slow closing -lid stay support built-in hydraulic dampening device. This lid support will hold the lid open until you are ready to close. Doors and lids will come down slowly and softly which eliminates slamming doors or smashed fingers.
| Brand | RUYUFE #ad |
| Manufacturer | RUYUFE #ad |
More information #ad
5. MORINBO
#adEasy to Install Pack of 2, Morinbo Lid Stay 105 Degree Open with Soft Close, Lid Support for Toy Box and Upward Top-Opening Flap Doors
#adSturdy lid stay with soft close excellent safety solution for toy box lid and kitchen cabinets, your lids will lower slowly and gently to avoid smashing fingers. Compact design of lid stay hinge the compact design allows for installation in tight fit areas.
More information #ad
2-way installation morinbo hinges can be installed on top opening or upward opening lids. Easy to install comes with an exclusive original design installation card, only takes 5 minutes to complete the installation by following the install placement measurement card and installation video. And per lid-stay support the range of door weight 3-10 lbs, Height 18-19 inch. They can support lid weight from 5lbs to 10lbs and lower gently; Weight support will be doubled by using 2 lid supports 6lbs-20lbs. The lid hinges supports opening the lid at a maximum Angle of 105 degree.
| Brand | MORINBO #ad |
| Manufacturer | MORINBO #ad |
| Height | 0.39 Inches |
| Length | 9.2 Inches |
| Width | 2.2 Inches |
| Model | MODP-145 |
More information #ad
6. RUYUFE
#adLid Stay Hinge Soft Close Safety Lid Support Toy Box Hinge 25-50lb for Toy Box Kitchen Cabinet Wardrobe of Top-Upward Opening & Top Flap Doors
#adSoft close safety hinge -- excellent safety solution for heavy hinged lids, lids will lower slowly and gently to avoid smashing fingers. Lid support hinge is suitable for doors of cabinet, toy box, wardrobe, kitchen, storage chest cupboard and so on.2
More information #ad
2 hinges support 25-50lbs. Corrosion resistance and anti-rust durable and practical. Keep the lid stay in place at different angles when the opening angle is larger than 90°. Lid will slow the descent when the opening angle is less than 70°. Durable heavy duty hinge--lid support hinge is made of zinc alloy, multi-layer electroplating solid process casting, fine workmanship. Lid stay hinge rotate one way to lock lid open- soft close hinges will keep your lid open until you push hinge down.
| Brand | RUYUFE #ad |
| Manufacturer | RUYUFE #ad |
More information #ad
7. VOCOMO
#adEasy Install, VOCOMO Lid Stay 105 Degree Open with Soft Close, Lid Support Hinge for Toy Box
#adMore information #ad
Each hinge can be used for right or left side mounting. 105 degree open - the lid hinges supports opening the lid at a maximum Angle of 105 degree. This lid stay will hold the lid open until you are ready to close. Soft close - lids will lower slowly and gently to avoid slams shut and crush the little fingers of children.| Brand | VOCOMO #ad |
| Manufacturer | VOCOMO #ad |
| Part Number | Hinges-03 |
More information #ad
8. douper
#adDouper Toy Box Hinges Soft Close Lid Stays 150N Gas Struts Heavy Duty Gas Springs Safety Hinges Pack of 2
#adAnd must with a 9 inch clearance. Never worry again about having to prop the lid open. Hinges will not work if your lid doesn’t match specified dimension and weight requirement.
More information #ad
Holds lid open -- these hinges will hold your lid open until you push it down. Weight capacity -- douper 150n heavy duty gas struts can support min 15 lbs and Max 20 lbs lid and lower gently; Weight support will be doubled with 2 hinges 30lbs/ 40pcs. Gently close design -- excellent safety solution for heavy hinged lids, lids will lower slowly and gently to avoid smashing fingers. Warm tips -- douper hinges will not applicable with the lid at width more than 50” and height over 25”.
| Brand | douper #ad |
| Manufacturer | Douper #ad |
| Part Number | DP057-TATAMI-150NN |
More information #ad
9. RUYUFE
#adKitchen Wardrobe Toy Chamber, Heavy Duty Hinge with Soft Close 50lb/2pcs Folding Lid Stay Hinge for Cabinet
#adEasy to install – only following the placement measurements on the instructions, you can easy to install lid stay.
More information #ad
Perfect for any lids or flaps when a soft closing motion is required, Upward door open adjustable angle of 75°, 90°, closet, such as toy box, cabinet, 110° by yourself. Wide usage lid support hinge—the lid support hinge support the lids of box, wardrobe lids. Keep the lid open - the lid hinge will hold the lid open until you want to close. Weight capacity—max weight support 50lbs/2 pcs, Lid support hinge can be mounted on the left or right side. You will get 2pcs lid stays, Allen wrench and exclusive redesign Installation instruction in package. Heavy toy chest lid to prevent fingers from getting smashed.
| Brand | RUYUFE #ad |
| Manufacturer | RUYUFE #ad |
More information #ad
10. VOCOMO
#adChest, Wardrobe, Safety Folding Lid Stay Hinge with Soft Close for Cabinet, VOCOMO Heavy Duty Lid Support Hinges, Toybox 50lb/2pcs, Kitchen
#adGentle slow close design - lids will lower slowly and gently to avoid crushing even the smallest of fingers. No risk purchase - We provide worry-free lifetime warrantyno man-madeand friendly customer service. The weight of the lid cannot exceed 50lbs.
More information #ad
It will not slam shut when the lid stays open. Easy install instruction - easy to follow installation instructions ensure a perfect install the first time! We provide installation instructions for 70°, 90° and 110° opening. You can also refer to the installation instructions in the fifth picture. 360 degree random stay - adjust the lid opening angle, and keep it stay in place at different angles without time limit.| Brand | VOCOMO #ad |
| Manufacturer | VOCOMO #ad |
| Part Number | CHS03482 |
More information #ad
