Top 10 Immersion Heater With Temperature Control – Temperature Controllers

As an Amazon Associate I earn from qualifying purchases.

1. bayite


Bayite Temperature Controller BTC201 Pre-Wired Digital Outlet Thermostat, 110V, 240V 10A, 2 Stage Heating and Cooling Mode

bayite #ad - Maximum output load: 1100W110V. Simplified design-plug and play, easy to set. Measure range is -58 ~ 230°F-50 ~ 110°C. Comes with a 3m9.

8ft waterproof probe sensor. Dual relay output-be able to connect with cooling and heating equipment at the same time. Compressor delay protection time setting and Temperature calibration. Support °C/°F display. Warranty-1 year warranty for replacement or full refund without return. Dual display window-be able to display real-time temperature and set temperature at the same time. Safe protection-high and low temperature alarms are available when the temperature overshoots your desired temperature.
Brandbayite #ad
Part NumberBTC201

2. UltraSource


UltraSource 505512 Stainless Steel Heating Element w/ Dial, 1500 W

UltraSource #ad - Stainless steel case and heating rod. On/off light indicator. Fits either a 1" npt flange or a 1-¼" opening with a lock nut and gasket included. 6', 3 wire grounded cord and plug. Adjustable dial allows for precise control of temperature.
BrandUltraSource #ad
ManufacturerUltraSource #ad
Weight2 Pounds
Part Number505512

3. Inkbird


Inkbird ITC-308 Digital Temperature Controller 2-Stage Outlet Thermostat Heating and Cooling Mode Carboy Homebrew Fermenter Greenhouse Terrarium 110V 10A 1100W

Inkbird #ad - Dual display windowBe able to display measured temperature and set temperature at the same time. Buzzer alarmhigh and low temperature alarms are available when the temperature is over or the sensor is with issue. It is with temperature calibration and compressor delay which can protect your refrigeration. Dual relay outputbe able to connect with refrigeration and heating equipment at the same time. Support °C/°F display. Convenient designplug and play, easy to use. Safetymaximum output load: 1100W110V.
BrandInkbird #ad
ManufacturerInkbird Tech #ad
Weight15.2 ounces
Part NumberITC-308-11

4. KD Heater


Easy and Convenient to use, Very little maintenance, Bucket Water Heater, 1300W 120V Stainless Fully Submersible Portable Electric Immersion Water Heater,100% Waterproof Immersion Water Heater

KD Heater #ad - Excellent durability and outstanding performance. Effectively and conveniently heat water. Completely submersible in water. Very little upkeep and maintenance, reducing labor and other operational costs.
BrandKD Heater #ad
ManufacturerKD Heater Co., Ltd. #ad
Part NumberKD-PD-AS13K

5. Mofarso


With Thermometer, Stainless-Steel Guard, Immersion Heater for Small Bathtub, Sandpaper, Immersion Water Heater Submersible Heats 5 Gallons Water in Minutes, Wire Ball U.S. Version, Portable Pool

Mofarso #ad - Anti-scalding designthe outside of the immersion heater is made of 304 stainless steel guard that ensures no direct exposure to the heating element by people or container wall, prevent scald effectively. We offer one year warranty, plz do not heat in metal containers. After 20 seconds of non-use, it will automatically and safely dissipate heat.

Premium materialthis immersion heater is made of 304 stainless steel heating tube material, the tube uses magnesium oxide as the heat-conducting material, features of high quality copper wire for carrying more electricity which has been strictly tested, better heat resistance and higher safety compared to other common heating tube. Note: please do not plug two heaters on the same outlet. Note: it is recommended that the continuous use should not exceed 3 hours at a time. Attached is a lcd digital thermometer that the metal probe of the thermometer is put into the water, you can know the water temperature. It is the first choice for home, if you have any question, inflatable swimming pools and other containers, small bathtubs, basins, plz let us know any time!.

Heat dissipates to the water faster by flowing through the holes in the guard. 1800w immersion heaterthis high power immersion water heater, heat 5 gallons of water in minutes, the more water you heat, the longer it lasts. Easy to useyou just need to put the immersion heater in the bucket, basin, small bathtub or portable pool completely and plug in the 120v/110v plug. Widely application & one year warrantythis stylish immersion heater is suitable for buckets, farms and outdoor job.
BrandMofarso #ad
ManufacturerMofarso #ad
Height10.04 Inches
Length2.16 Inches
Width1.57 Inches
Part NumberAJ 80000824
WarrantyOne Year Warranty

6. KD Heater


Bucket Water Heater, Overheating Prevention, Easy to Use, 1300W 120V Titanium Fully Submersible Portable Electric Immersion Water Heater, Auto Shut Off, Built in Thermostat

KD Heater #ad - High degree of efficiency, Easy and convenient to use. Automatically turn off when it reaches your desired temperature and turn back on when it senses that the liquid has cooled off. Built in thermostat to choose the temperature you want your liquid to be. Auto shut-off to prevent the liquid from overheating. Can be completely submerged in a liquid ; Fresh Water, Salt Water, Solutions, etc.
BrandKD Heater #ad
ManufacturerKD Heater Co., Ltd. #ad
Weight3.83 Pounds
Part NumberKD-PD-AJT13K



DIGITEN DTC101 Digital Thermostat Outlet Thermometer LCD Simple-Stage Plug-in Temperature Controller Heating or Cooling 110V 10A for Greenhouse Mushroom Terrarium Reptile Fermentation Homebrew

DIGITEN #ad - Dual modes: freely switch between heating and cooling modes. Widely use: brewing, greenhouse, household appliances, breeding, etc. Temperature Unit: Supports Centigrade or Fahrenheit. Convenience design: Plug and play, easy to use. Large led display: be able to show measured temperature and set temperature at the same time.
BrandDIGITEN #ad
ManufacturerDIGITEN #ad
Weight0.86 Pounds
Part NumberDTC101



WILLHI WH1436A Temperature Controller 110V Digital Thermostat Switch Sous Vide Controller NTC 10K Sensor Improved Version

WILLHI #ad - Get the new version right now. The difference of the 2 degrees can be minimum 01 and maximum 288. Outlet, larger power, wider control range, enhanced waterproof sensor probe.

Heating or refrigeration working mode: Switch between heating mode and refrigeration mode according to the device you plug into the controller. Outlet not compatible with 2 hot lines 220V plug Celsius or Fahrenheit Read-out. Total Outlet: 1. We've improved the controller: simplified operation, standard U. S. Wide range of uses: seedling heat mat, accelerating germination, fermentation, electric radiator, electric oven, home brewing, incubation, pet breeding, aquarium, BBQ, etc . Max load: 1100w at 110v. Keep temp in desired range: turn on your device at a set degree and turn it off at another set degree.
BrandWILLHI #ad
ManufacturerWILLHI #ad
Height1.8 Inches
Length4.9 Inches
Width3.9 Inches
Part NumberWH1436
Warranty1 year from purchase date.

9. Inkbird


Inkbird Temperature Controlled Outlet Chick Temperature Controller Heater Controller for Refrigerator Aquarium Reptiles and Plants ITC-306T

Inkbird #ad - Please note it is only heating controller without cooling function. Dual display window Be able to display measured temperature and set temperature at the same time.

Convenient design plug and play, easy to use. Only heating temperature control mode: on/off control. Maximum output load: 1200W 110V. Dual time cycle settingcan be set different temperature from day and night on the basis of the physical needs of animals and plants during 24 hours. Different functionstemperature calibration, over-temperature and sensor fault alarm. But totally could not over 1200W. Support reading with Centigrade or Fahrenheit. Both of the plugs can control the heating.
BrandInkbird #ad
ManufacturerInkbird #ad
Part NumberItc-306t

10. Inkbird


Inkbird ITC308 Freezer Thermostat Heating Cooling Plug Temperature Controller Outlet 110V 1200W Digital Temp Control for Greenhouse Heater Cooler Reptile Brewing Fermentation Kegerator Probe

Inkbird #ad - Easily calibrated. Can display in Centigrade or Fahrenheit. Whether you need temperature control for fermentation, greenhouse, kombucha control or to set up your temperature project system, the ITC-308 temperature controller is a great choice. Be able to connect with refrigeration and heating equipment at the same time. Simple to use: plug it in, place the probe, set the temp ranges, plug in the heater/cooler into the marked outlet.
BrandInkbird #ad
ManufacturerLerway Tech #ad
Weight0.9 Pounds
Part NumberCOMINHKG084064