As an Amazon Associate I earn from qualifying purchases.
1. Watts Premier #ad
Watts Premier Instant Hot Water Recirculating Pump System with Built-In Timer 6" X 6" #adWatts Premier #ad
- Provides hot water at every faucet or shower when needed and helps eliminate wasted water. Kit includes a pump with timer with 10' cord, 2 adapters with rubber washers, valve mounting screws, sensor valve, and two 12-inch supply lines.
Easily installs to existing plumbing and is maintenance-free. 24-hour programmable timer activates pump when you need it. Overall Dimension: 6. 2 x 6 x 5 inches. Voltage: 120 volts, item weight: 8. 5 pounds.
|Brand||Watts Premier #ad|
|Warranty||Watts (the "Company") warrants each product to be free from defects in material and workmanship under normal usage for a period of one year from the date of original shipment. In the event of such defects within the warranty period, the Company will, at its option, replace or recondition the product without charge|
2. Grundfos #ad
Grundfos GRU-595916 595916 #adGrundfos #ad
- Tlc = timer, line Cord, 6-Foot. The grundfos circulator pumps, series up, are specifically designed for heating systems. Connection: 3/4-inch m by 3/4-inch fnPT. Maintenance-free, easy to install, low energy consumption, quiet running.
Motors: single phase, 60 hertz, 115v. Supply voltage:115-120 vaC, Contact Rating: 16 amps. Flow range: 0 - 9 u. S. Gpm, head range: 0 - 6-Foot. The pumps are also suitable for circulation of hot domestic water and for circulation of liquid in cooling and air-conditioning systems.
|Warranty||2 years from the date of installation|
3. Anbull #ad
Anbull Instant Hot Water Recirculating Pump System Built-In Timer with Sensor Valve Kit, 3/4 Inch Recirculating Pump for Water Heater System Green #adAnbull #ad
- Note: when the pump is connected to your piping, please use Teflon tape to avoid leaks caused by loose connections. The intine of the circulator pump adopts mirror processing technology, long service life. Liquid temperature is 2℃ 36°F, sturdy and durable, high efficiency.
Min. With a sensor valve, no need to wait to turn on the faucet to get hot water, 24-hour programmable timer, no electricity required. And the temperature is adjustable, the initial set temperature is 100°F.
The circulation pump has undergone special anti-rust treatment to resist corrosion, not easy to rust, and more durable. All copper motor, long service life. The pump connector is made of lead-free copper, which can solve the trouble of rusting of the cast iron pump connector.
If you have any questions, please feel free to contact us. Hot water recirculation pump adopts new intelligent control panel, freely set the time period you need hot water, solve the trouble and water waste caused by waiting for water heating. 3/4" npt. Nsf certified, maintenance-free, anti-scaling, corrosion resistance, safe for drinking water. Liquid temperature is 70℃158℉. Please note: never let the pumP RUN DRY.
4. BACOENG #ad
BACOENG 3/4 inch NPT Hot Water Circulation Pump for Floor Heating & Recirculating System w/ Connectors #adBACOENG #ad
- Flexible application - directly used in hot water recirculating and industrial cooling system. Features & material - built-in high sensitive electronic sensors with three-speed control, designed for energy saving≤1kW·h one day; Super silent, hardly feel it at work; Anti-fraying; Cast Iron Pump.
Main parameter - power:93/67/46w; in/outlet:3/4''npt; voltage:115v, 60hz; Installation length:5.
1inches; liquid:32 - 230℉; Green. 2 years Warranty. Add a bridge valve to be used in no return pipe system. Also a wise choice for DIY: Add a timer to be more energy saving. Npt standard vs others bsp - 1/2" x 3/4" npt, lead-free brass fitting *2; The most useful & standard connector to prevent the leaks in hot water recirculating system.
5. AO Smith #ad
APCOM RT1 Hot Water Recirculating Pump System With Built-In Timer, Dedicated Return Line #adAO Smith #ad
- Pump installs at the water heater and is designed for indoor installation. Energy & cost efficient - the most energy efficient circulator on the market that reduces waste and costs associated with the consumption of water.
Fully automatic operation - this system uses a built-in thermostat and programmable timer that auto-regulates temperature to save time, money and energy. For dedicated return line - perfect for houses with a dedicated return line and less than 300 ft of household piping.
Instantly experience hot water - this recirculation system provides instant hot water to any water source.
All-inclusive - kit includes stainless steel pump with flexible mounting options and built-in programmable timer, 3/4 in NPT union fittings and 10 ft power cord. Professional installation recommended by a local certified plumbing contractor. Designed for tank type water heaters. Enjoy the comfort and convenience of hot water in your home without the wait.
6. Happybuy #ad
Happybuy RS15-6 Hot Water Recirculating Pump 110V Circulation Pump 3/4-Inch NPT 3-speed Recirculation Pump 9.5 Gpm for Water Heater System #adHappybuy #ad
- Bearing: Carbon axia. Voltage/frequency: 110-120v, 60hz. Advantage: the hot water circulation pump features high efficiency with low consumption. Max pressure: 145 psi 10 bar, the hot water circulation pump with three-speed control. Flow: 36/29/20 lpM 9. 5/7. 66/5.
28 gpm. Rated power: 93/67/46 w. Super silent, suitable for water scarce areas, reducing the waste of cold water and waiting time, anti-fraying, environmental friendly, such as desert areas. Impeller: corrosion-resistant, composite, PES. Max head: 6/4. 9/4 m 20/16/13 ft;pump housing: Aluminum.
Convenient: easy installation, waiting for 2-3 minutes in the past, just need a wrench to connect the pump to the pipeline, saving you the cost of plumbers; Instant hot water, now it takes only 15 seconds to get hot water the kitchen takes about 1 minute to get hot water due to low flow restriction.
In addition, if your pipes pass through the floor, the floor will also become warm. Wide application: our hot water circulation pump rs15-6 is suitable for a wide range of applications, water and pressurized with industrial equipment, air conditioning, solar circulating water, for city buildings, boilers, suburban villas, houses, hot water circulating warm and so on. Main parameter: the hot water circulation pump features npt 3/4 inch 19. 05 mm inlet/outlet.
7. AO Smith #ad
APCOM FT1 Instant Hot Water Recirculating Pump System With Built-In Timer #adAO Smith #ad
- Instantly experience hot water - this recirculation system provides instant hot water to any water source. Energy & cost efficient - the most energy efficient circulator on the market that reduces waste and costs associated with the consumption of water.
Without dedicated return line - perfect for houses without a dedicated return line or electrical connection under your sink. Pump installs at the water heater and Aqua-Flash valve installs under the sink.
Designed for tank type water heaters. Pump is designed for indoor installation. Fully automatic operation - this system uses a brass bypass valve with a bimetal coil thermostat and built-in programmable timer that auto-regulates temperature to save time, money and energy.
Professional installation recommended by a local certified plumbing contractor if the water line needs to be cut for pump installation. Enjoy the comfort and convenience of hot water in your home without the wait. Simple diy installation - kit includes stainless steel pump with built-in programmable timer, braided hose, bypass valve, tee and all necessary fittings.
8. Laing #ad
Laing LHB08100092 AutoCirc Recirculation Pump with Timer #adLaing #ad
- Long power cord. Packaged complete with a 6 ft. Has a built-in 24 hour timer which allows the selection of system operating periods to suit family usage. Requires only 14 watts of power; Does not require a return line.
The auto circ pump act e1 is installed under the sink or faucet farthest from the water heater. Saves the average family of four up to 17, 000 gallons of water annually. Noise level - Whisper quiet, less than 30 db.
|Warranty||Warranted against defects in materials and workmanship for 2 years from the date of manufacture or 1 year from the date of user purchase, whichever is sooner.|
9. PROZRTED #ad
PROZRTED Smart Instant Hot Water Recirculating Pump System 3 speed with Bulit-in Thermostat HBS24-12 #adPROZRTED #ad
- Built in check valve and built in high accurate temperature sensor. Smart mode: instant hot water always available. High flow 6. 1gpm/366gph max and high lift 39. 3ft max. Super quiet pump and you almost can’t hear the pump running voice.
Lead free grade copper pump body and connectors. Maintenance-free. Start the pump by push remote control middle button. No more water wasted in waiting.
3 running speed. The pump can remember the last settings when it was powered off. This remote controller is not included in this package and needs to be purchased separately.
Save gas, save water. Advanced digital permanent magnet brush less 24v dc motor makes the pump more safe, more powerful and more durable. Up to 10% of your water bill will be saved. As the temperature hits 38 ℃1004f, the pump will shut off automatically. With 10 ft cord and easy to install. Work well with the smart plug. Smart memory function.
|Warranty||2-Year Limited Warranty|
10. EZ-FLO #ad
Black, Eastman 3/4 Inch Nevercold Universal Under Sink Hot Water Recirculation Pump Kit, 70601 #adEZ-FLO #ad
- Cost effective: the nevercold hot water recirculating pump system can lower your water bill by up to 10% and save up to 12, 000 gallons of water per year. Certified: efficient circulation pump meets California Title 24 on-call requirements.
Easy installation: circulating pump can be easily installed within 30 minutes, and is ideal for homes with standard single-pipe plumbing systems up to 250 feet **Not for use with tankless water heaters, requires an electrical outlet**.
On demand hot water: the nevercold recirculating pump system is specially designed for under sink installation, and makes sure you have hot water in every area of your home when you need it, cutting down on wait times and water waste; equipped with a built-in programmable timer that activates the pump at times of demand.
What is included: 1 stainless recirculating pump with a pre-wired 10 ft power cord, 2 flange gaskets, 2 3/4 inch NPT male threaded stainless steel flanges, 2 24 inch long flex hoses with 3/4 inch NPT x 3/4 inch NPT, and 2 tees with 1/2 inch compression x 3/4 inch NPT x 1/2 inch compression.