Top 10 Gx24q to E26/E27 LED – Light Sockets

As an Amazon Associate I earn from qualifying purchases.

1. Bonlux

#ad

Rewire/Remove/Bypass the Ballast is Required, Bonlux 6-pack Gx24q to E26/E27 Socket Adapter, Gx24 Short 4 Pin to Medium Edison Lamp Base Converter

#ad
Bonlux #ad - If there is a ballast connected at your fixture, please dismantle the ballast before install the LED light, otherwise the ballast will make resonance high voltage which can destroy the light. It has the short version 4-pins and is suitable and compatible with 4 pin g24q-1, GX24Q-1, G24Q-3, GX24Q-2, G24Q-2, GX24Q-3 Please confirm what base you need before you buy.

Please consult an electrician if you are unsure. Save you a lot of troubles and money to replace your original Halogen CFL lighting fixtures. Doing so will likely cause the bulb flickering and EVEN SMOKING!! This lamp base converter doesn't change any voltage or current. Do not operate the led bulb with a ballast in the fixture. The base depth of this product is 15mm/059 inches.

Even you are replacing with e26/e27 cfl, you need to remove the ballast! Otherwise, the CFL E26/e27 Lamp will be flickering or not even turn on! Note: it is 100% that PL-C downlight fixture has ballast inside. Easily transfer your gx24 fixture to fit any of the E26/E27 standard medium base light bulbs. Attention buyers: rewiring & removing/bypassing the ballast at the light fixture is required for these adapters to function properly.
BrandBonlux #ad
ManufacturerLusta LED Co., Ltd #ad
Height3.14 Inches
Length2.04 Inches
Weight5 ounces
Width3.14 Inches

2. Luxvista

#ad

G24Q to E26/E27 4 Pin CFL Lamp Base Converter, Gx24q to E26 Adapter, 10-Pack, Luxvista Gx24q to E26 Lamp Base Converter, Remove Bypass the Ballast

#ad
Luxvista #ad - Compatible base - suit for all cfl 4 pin gx24 base, gx24q-1, compatible with 4 pin g24q-1, GX24Q-2, G24Q-2, g24q-3, GX24Q-3 Please confirm what base you need before you buy.

No ballast - ballast need to be removed or bypassed. High temperature resistant - Anti-burning PBT material and anti-aging enable more safty in your life. Easy installation - twist into existing GX24Q socket and it immediately transforms your fixture to fit any standard E26/E27 medium screw base bulb. If you have not remove or bypass ballast, it will damage the bulb or cause filckering. Features - gx24q to medium edison e26/e27 adapter converter, 4 pin gx24 base, dimension: H 5. 6cm * w 8cm 2. 28 * 3. 14 inches.
BrandLuxvista #ad
ManufacturerLusta LED Co., Ltd #ad
Height3.14 Inches
Length2.28 Inches
Width2.28 Inches
Part Number818

3. AC

#ad

Lamp Holder Converters with Short Shaft Pack of 10, 4-Pin Light Bulb Socket, G24 to E26 E27 Lamp Base Converter, Bulb Base Adapter, LED Light Sockets Adapter

#ad
AC #ad - Please bypass or remove the ballast when you use, otherwise the bulb doesn't light on. Please check your bulb size, and refer on our adapter detailed size on the left picture before you purchase. Works with led / halogen / CFL light bulb lamps.

Ideal for home use. Suitable for multiple voltagesNote: it can not transfer the voltage, just the socket converter. There are some led driver who can be compatible with the ballast, there will be 2 ballasts, we only removed the lamp, the ballast is still working in front fixture; even we change to E26/E27 CFL, no LED Driver can be compatible with all the ballast. So the best thing is bypass or remove once we want to change CFL to LED Lamp. Easy to install, plug and play.

When we remove pin-based CFL, the light will not work. G24 base to e26/e27 light sockets adapter converter can be used to transforms G24 fixture to fit standard the E26 / E27 medium size bulb in any. The ballast in your fixture must be removed or bypassed for these adapterS TO FUNCTION PROPERLY. It fits any standard medium bulb to the G24 and enables almost all commonly found bulbs to work with the output. Material: flame resistant pbt. This adapter with SHORT shaft.
BrandAC #ad
ManufacturerAC #ad

4. E-Simpo

#ad

Must Bypass Ballast to Avoid Flick Smoke Burn 6pcs E-Simpo 4Pin Conductive Gx24q to E26/E27 Lamp Base Adapter Short G24q to Medium Edison Light Socket Converter Replace CFL PL GX24Q Holder

#ad
E-Simpo #ad - Ballast is a must to start a high voltage600v-1500v 1ms to light up the CFL, like GX24Q G24 GX23 G23 are lamp-ballast separated, and easily destroy the led lamp. There are led bulbs with driver compatible with the ballast, cause high temperature which will damage LED Bulb, So the Professional doing is bypass it.

But no led driver can be compatible with all ballast. Ballast is there consuming power, E26/E27 bulbs are self-ballast. Because led lamp are built with leds and driver which is transforming the 100-240v ac to dc for leds. Consult an electrician if you are unsure. This is 4p short 15. 5mm gx24q base, cut all the input and output wires, the ballast has a black and white wire on the input side, not for 2p;not for diy!!! need rewiring/bypass/ remove the ballast, two red and two blue output side. Do not operate a led bulb with a ballast in the fixture, doing so will likely damage the bulb.

All pin-based cfl is ballast-lamp separated, which you may find work without bypass ballast. To bypass this ballast, and connect 2 Red to Black, 2 Blue to White wire. So the led driver input should be 100v-240v or 85-265V, but all screw-in E26 E27 are lamp-ballast integrated. The ballast in your fixture must be removed or bypassed for these adapters to function properly. All pin-based cfl, so 600-1500v will be too high, but it is dangerous for led lamp.
BrandE-Simpo #ad
ManufacturerE-Simpo #ad
Part NumberGX24Q-E26
ModelGX24Q to E26/E27 Adapter

5. E-Simpo

#ad

Need Bypass BallastGX24Q-3 to E26/E27 CFL Bulb Socket Adapter 6pcs E-Simpo 4-Pin GX24Q G24Q to Standard Medium Bulb Holder Base Converter

#ad
E-Simpo #ad - No ballast is required. Home or commercial use, Suitable for less than 100W. With base depth 15. 5mm/06 inches. 6pcs. Material: anti-burning pbt, copper contact. Short version 4-pins: q series has a shorter tip than d series, gx24q-1, gx24q-2, g24q-2.

G24q-3, suitable for g24q-1, gx24q-3 socket;works for 4-pin cfl with g24q-1 base:10w 13w quad tube; gx24q-1 base:10w 13w triple tube;G24q-2 Base:18w Quad Tube;GX24q-2 Base:18w Triple Tube;G24q-3 Base:26w 32w Quad Tube;GX24q-3 Base:26w 32w Triple Tube;. It is 100% that pl-c downlight fixture has ballast inside. Dismantle ballast before install the led light, reviews like burnt, smell, hot, otherwise the ballast will make resonance high voltage which destroy the light, flicking are all results that not bypass the ballast correctly.

To bypass this ballast, please install it only with qualified electrician!!! BYPASS/ REMOVE the ballast, and connect 2 Red to Black, 2 Blue to White wire.4pin gx24q or g24q to e26/e27 light socket adapter. Please make sure the lamp base type before you buy, DON'T Mix with other 2P 4P socket. Need rewiring!!! not for diy, the ballast has a black and white wire on the input side, cut all the input and output wires, two red and two blue output side.
BrandE-Simpo #ad
ManufacturerE-Simpo #ad
ModelGX24Q-E26

6. E-Simpo

#ad

10pcs E-Simpo 4Pin Gx24q CFL to E26/E27 Lamp Base Socket Adapter Converter. Need Rewire to Bypass Ballast. 10-Pack

#ad
E-Simpo #ad - G24q series female socket fixture to e26 male Bulb Base Adapter - Q series has a shorter tip than D series and is more common in the US. Because led lamp are built with leds and driver which is transforming the 100-240V AC to DC for LEDs. The ballast in your fixture must be removed or bypassed for these adapters to function properly.

All pin-based cfl, but all screw-in e26 e27 are lamp-ballast integrated. Ballast is a must to start a high voltage600v-1500v 1ms to light up the cfl, so 600-1500v will be too high, like gx24q G24 GX23 G23 are lamp-ballast separated, but it is dangerous for LED Lamp. So the best thing is bypass or remove once we want to change CFL to LED Lamp. So the led driver input should be 100V-240V or 85-265V, and easily destroy the led lamp. When we remove pin-based cfl, the ballast is still working in front fixture; even we change to E26/E27 CFL, we only removed the lamp, there will be 2 ballasts, the light will not work.

Consult an electrician if you are unsure. This is 4p, not for 2p;need bypass or remove the ballast, otherwise, it doesn't light on. There are some led driver who can be compatible with the ballast, no led driver can be compatible with all the ballast. Do not operate a led bulb with a ballast in the fixture, doing so will likely damage the bulb.
BrandE-Simpo #ad
ManufacturerE-Simpo #ad
Height2.3 Inches
Length1.5 Inches
Weight0.05 Pounds
Width1.5 Inches
Part NumberGX24Q-E26

7. E-Simpo

#ad

Need Rewire to Bypass Ballast. 2-Pack, 2pcs E-Simpo 4Pin Gx24q to E26/E27 Light Socket Adapter Lamp Base Converter. NOT PLUG AND PLAY

#ad
E-Simpo #ad - Pbt housing, copper contact. Suitable for all voltage: 100-240v, works for 4-pin cfl with g24q-1 base:10w 13w quad tube; gx24q-1 base:10w 13w triple tube;G24q-2 Base:18w Quad Tube;GX24q-2 Base:18w Triple Tube;G24q-3 Base:26w 32w Quad Tube;GX24q-3 Base:26w 32w Triple Tube.

2pcs/lot, gx24q-1, g24q-2. G24q-3, suitable for g24q-1, sample pack. Doing so will likely damage the bulb. When we remove pin-based cfl, we only removed the lamp, there will be 2 ballasts, the ballast is still working in front fixture; even we change to E26/E27 CFL, the light will not work. Short version 4pins, gX24q-2, GX24q-3 socket;. There are some led driver who can be compatible with the ballast, no led driver can be compatible with all the ballast.

So the best thing is bypass or remove once we want to change CFL to LED Lamp. 4p conductive, e-simpo's new generation. But mostly gx24q cfls are with an electronic ballast inside, burnt, hot or smell, which will cause the LED bulb flickering, and damage the electrical parts inside the bulb. Physically change the socket contact, twist into existing gx24q socket and transform the fixture to fit any standard E26 E27 medium size bulb. With base depth is 15. 5mm/0
BrandE-Simpo #ad
ManufacturerE-Simpo #ad
Weight66 Grams

8. E-Simpo

#ad

Double Tab,2P in Parallel, 2pcs E-Simpo GX23 Pin-Base to E26/E27 Lamp Base Adapter CFL PL Lamp base to E26 E27 Edison Socket Holder Adapter, Gx23 to E26 Adapter Gx23 to E26/E27

#ad
E-Simpo #ad - Size: gx23 type 2 pin cfl to medium e26. 2-pin cfl with gx23 base: 13w single Tube; GX23-2 Base: 13w Quad Tube. 2pcs/pack as sample test. Flame retardant pbt, phosphor bronze. Suit for gx23 socket, Physically change the contact, don't change voltage. Works for 2-pin cfl with gx23 base: 13w single Tube; and GX23-2 Base:13w Quad Tube. Gx23 has 2tab in the central square plastic part. Gx23 series female socket fixture to e26 Male Bulb Base Adapter. This is for gx23 only, g24d, not for G23, GX24d which are also 2P.
BrandE-Simpo #ad
ManufacturerE-Simpo #ad
Weight68 Grams

9. E-Simpo

#ad

Rohs,Need Bypass Ballast., Gx24q to E26 Adapter,Lamp Holder Converter, 15-Pack 4P Gx24q to E26 Lamp Base Converter,15.5mm G24Q to E26/e27

#ad
E-Simpo #ad - There are some led driver who can be compatible with the ballast, there will be 2 ballasts, the ballast is still working in front fixture; even we change to E26/E27 CFL, no LED Driver can be compatible with all the ballast. Consult an electrician if you are unsure.

Ballast is a must to start a high voltage600v-1500v 1ms to light up the CFL, so 600-1500V will be too high, and easily destroy the led lamp. The ballast in your fixture must be removed or bypassed for these adapters to function properly. So the led driver input should be 100v-240v or 85-265V, but all screw-in E26 E27 are lamp-ballast integrated. Do not operate a led bulb with a ballast in the fixture, doing so will likely damage the bulb. So the best thing is bypass or remove once we want to change CFL to LED Lamp.

G24q series female socket fixture to e26 male Bulb Base Adapter - Q series has a shorter tip than D series and is more common in the US. This is 4p, not for 2p;need bypass or remove the ballast, otherwise, it doesn't light on. Because led lamp are built with leds and driver which is transforming the 100-240v AC to DC for LEDs. When we remove pin-based CFL, we only removed the lamp, the light will not work. All pin-based cfl, like gx24q g24d gx24d gx23 g23 are lamp-ballast separated, but it is dangerous for led lamp.
BrandE-Simpo #ad
ManufacturerE-Simpo #ad
Height1.5 Inches
Length1.5 Inches
Weight0.88 Pounds
Width2.31 Inches
Part NumberG24-E26
ModelGX24Q to E26 Light Socket Adapter
Warranty1 year for the lamp holder, but don't blame the converter if
1. You don't bypass the ballast when your e26 lamp is not compatible with the ballast;
2. The socket is not gx24q or g24q, whose 4 holes has contact and 2 holes at one side are mutually connected or all 4 holes has wires out, one side, 2 holes' wires go to l, the other side goes to n.

10. PHITUODA

#ad

Gx24q to E27 Lamp Base Holder, NOT PLUG AND PLAY, PHITUODA 4pcs Gx24q to E26/E27 Socket Adapter, Rewire/Remove/Bypass the Ballast is Required, 4 Pin Bulb Base Converter LED Accessories

#ad
PHITUODA #ad - Widely application: our socket converter is suitable for home lighting, office lighting, photography lighting, restaurant lighting, and other suitable places. Do not use ballasts to operate LED bulbs in lamps. Works for 4-pin cfl with g24q-1 base:10w 13w quad tube; gx24q-1 base:10w 13w triple tube; g24q-2 base:18w quad Tube; GX24q-2 Base:18w Triple Tube; G24q-3 Base:26w 32w Quad Tube; GX24q-3 Base:26w 32w Triple Tube.

Warmly notes: in order for these adapters to work properly, the ballast in the luminaire must be removed or bypassed. If you are not sure, please consult an electrician. We're so confident you will love our products like our other 5-star reviewers! You will be amazed at the customer service you receive after the sale! Premium material: lamp base converter made of flame retardant PBT material and copper nickel-plated pins, more durable and practical, Small size and lightweight.

If you are not satisfied within 90-days, send 1 simple email and receive a 100% money-back refund. Hassle-free guarantee: phituoda's products can only be packed and shipped after strict quality inspection. Doing so may cause the bulb to flicker or even smoke! Check the size first: 4 x led light socket adapter. They are practical and convenient for your life that is an ideal household tool.
BrandPHITUODA #ad
ManufacturerPHITUODA #ad
Part NumberTR20210515 - 003