Top 10 Grizzly Table Saw Accessories – Table Saw Accessories

As an Amazon Associate I earn from qualifying purchases.

1. Peachtree Woodworking Supply

#ad

Phenolic Zero Clearance Insert for Delta Uni-Saw Contractor | Large Grizzly and Other Table Saws with a 13-3/8” x 3-3/4” x 1/2” Throat Plate Opening

#ad
Peachtree Woodworking Supply #ad - If you own a table saw, then you probably have had smaller pieces of wood get caught between the saw blade and the factory supplied throat plate opening. Zero clearances help minimize this situation from happening since there is no gap between the blade and the zero clearance opening.

The insert features two snug Fit sand-able side tabs that allow you to remove a little material at a time for a perfect fit if necessary. Since every table saw brand and manufacturer is different, we recommend that you measure the exact length, width and thickness of your table saw insert or opening and compare it to the size we list. The insert also features a top and a side Snug Fit Screw for a tight fit to you saw with no movement! Insert colors may vary from images shown. Zero clearance inserts help prevent tear out by essentially enveloping the blade on all sides which doesn’t allow the wood to tear out since there is not gap between the blade and insert.

Zero clearance inserts are table saw specific. This is especially true when cutting plywood. The reason you would use zero clearance inserts with dado blades is to reduce the amount of tear out the dado blade set produces. This can cause that piece of wood to jam up against the blade and go flying across the room or worse yet, right back at you. The opening is more like a custom slot cut to the exact width of your table saw blade.
BrandPeachtree Woodworking Supply #ad
ManufacturerFulton #ad
Weight1.23 Pounds
Part NumberAMZ-4133
Model4133

2. Fulton

#ad

Jet,Grizzly,Power Matic 64 Zero Clearance Insert for Table Saws

#ad
Fulton #ad - Includes leveling screws, side and end adjustment screws;pre-cut blade bottom pocket. Please check your Length x Width x Thickness of your current insert before ordering. Made from high-density phenolic laminate with a bonded-melamine surface. Insert dimensions: 12-1/2” x 3-9/16” x 7/16” - jt-164 jet/Powermatic 64A Zero-Clearance Table Saw Insert. Small jet, grizzly, Powermatic 64 insert will fitvarious models of table saws.
BrandFulton #ad
ManufacturerFulton #ad
Part NumberAMZ-4134
ModelAMZ-4134

3. Grizzly Industrial

#ad

Resaw Fence Complete for 14" Bandsaws, Grizzly Industrial H7587

#ad
Grizzly Industrial #ad - The removable extruded re-saw fence allows you to lower the blade guides closer to the shorter fence for doing normal work. These fences can be purchased as a retrofit kit for existing Grizzly bandsaws as well as a complete fence system for just about any brand of saw with. Designed by us here at grizzly, these new re-saw fences are an upgrade to the standard fences and allow users to alternate between a taller and shorte.
BrandGrizzly Industrial #ad
ManufacturerGrizzly #ad
Height6 Inches
Length23.25 Inches
Weight16.05 Pounds
Width11.5 Inches
Part NumberH7587
ModelH7587

4. KREG

#ad

KREG ACS415 Adaptive Cutting System Parallel Guides

#ad
KREG #ad - Precise, easy-to-read multipurpose measuring rules. Safe cutting is provided by positioning the 62" Guide Track precisely while the saw moves over the material. Precision guides for making accurate, repeatable cuts from 12" to 96" wide when using the Adaptive Cutting System Plunge Saw and 62" Guide Track. Attach quickly when needed, and easily removable without losing calibration. Versatile for making clean, straight rip cuts from 12" to 96" wide.
BrandKREG #ad
ManufacturerKreg #ad
Height4 Inches
Length12 Inches
Weight1.3 Pounds
Width4 Inches
Part NumberACS415
ModelACS415

5. MICRO JIG

#ad

Router Tables, Band Saws, GRR-RIPPER 3D Pushblock for Table Saws, and Jointers by MICROJIG

#ad
MICRO JIG #ad - A true microjIG Innovation. Precision cutting and control down to 1/4" Ripping. 3-directional Force for total control of the workpiece. Precise 1/4" thin rips. Powerful high-friction durable grip for extreme hold. Fully adjustable for easy handling. Virtually eliminates kickback. Moving-blade-Guard Hand protection. Designed in usa. Protect hands and prevent kickback like never before. Work with small stock safely on the table saw, Router table, Jointer, & Band saw. Work with small stock safely.
BrandMICRO JIG #ad
ManufacturerMICROJIG, Inc. #ad
Height4.5 Inches
Length7 Inches
Weight1.8 Pounds
Width4.5 Inches
Part NumberGR-100
ModelGR-100
WarrantyExtended 3-Year Manufacturer's Warranty from Authorized Dealers Only

6. Fulton

#ad

Fulton DIY Table Saw Crosscut Sled Kit with 2 UHMW Bars 2 Aluminum Tracks 1 Knob and 1 Bolt along with Full Color HOW TO BUILD YOUR OWN Crosscut Sled Guide Booklet

#ad
Fulton #ad - Please note, 2 each 12” long mini tracks, 1 each knob, the bars do NOT FIT RYOBI table saw track slots. The tracks that are included in this kit are made from solid extruded aluminum and are made in the USA. While we as a woodworking company know exactly what they are used for, many novice or non-woodworkers do not.

Another advantage is that UHMW won’t expand or contract like wood does during drastic weather changes. Each kit comes with 2 each 19” long by 3/4” by 3/8” uhmw bars, 1 each 1/4” by 20 tpi bolt and a how to build your own crosscut sled guide book. The stop block will allow you to make repetitive cuts without having to constantly move and measure the fence distance each time you make a cut. Uhmw bars are most commonly used as runners for crosscut sleds since they don’t produce as much friction as wood does.

You may also have had the need to make repetitive cuts of the same length. Making small cuts, cross cuts and repetitive length cuts is where table saw crosscut sleds excel. Each track is cut to length for the perfect sub-fence on the crosscut sled. Crosscut sleds help stabilize the work piece and are very accurate since they are essentially calibrated to your saw during the sled building process. Uhmw bars are also slick and won’t leave any residue, dust or shavings behind like wooden bars tend to do.
BrandFulton #ad
ManufacturerFulton Woodworking Tools and Accessories #ad
Weight0.84 Pounds
Part Number11577
Model11577

7. Leecraft

#ad

LEECRAFT RIDGID R4512 Table Saw Zero-Clearance Blade Insert

#ad
Leecraft #ad - Durable phelnolic construction. Fits ridgid r4512 professional Table Saw. Zero-clearance blade insert with riving knife slot. 15-1/8" x 3-3/4" x 1/8". Coated surface for friction free operation.
BrandLeecraft #ad
ManufacturerLeecraft #ad
Height0.9 Inches
Length15.25 Inches
Weight1.09 Pounds
Width3.75 Inches
Part NumberRG-5
Model.

8. WORX

#ad

WORX WX051 Pegasus Folding Work Table & Sawhorse

#ad
WORX #ad - And it’s easy to transition between the two. Light and sturdy it’s only 25 lbs. And its foldable design makes it easy to move and store. Whether your worksite or workshop is spacious or tight, this building solution expands or contracts to fit your needs.

Worktable & sawhorse holds up to 300 lbs. As a work table, supports 1, 000 lbs. Storage shelf on the bottom of the work pegasus we’ve made a place to hold a power strip or supplies. Do it better. Worx tools are engineered with cutting-edge technology, and above modern efficiency standards, so you can build a cost-effective tool collection that’s been designed to last. Built to last made out of a dependable, molded ABS with steel supports and fittings.

Do it with worx. Because they’re designed specifically for the Pegasus, they’ll be stronger and last longer. Custom clamps two quick clamps are integrated and stay attached even when you fold the table into a sawhorse. This table will be with you for the long haul. Do it yourself. Perfect extra shelf or storage for your workspace.
BrandWORX #ad
ManufacturerWORX #ad
Height6.3 Inches
Length27.17 Inches
Weight28 Pounds
Width37.04 Inches
Part NumberWX051
ModelWX051
WarrantyComes with 3-year Manufacturer’s Warranty

9. DEWALT

#ad

DEWALT 10-Inch Table Saw, 32-1/2-Inch Rip Capacity DWE7491RS

#ad
DEWALT #ad - Rolling stand designed for easy set up and breakdown with excellent stability. Your purchase includes one dewalt table saw, 2x blade wrenches, rolling stand, miter gauge, 10inch 24-tooth carbide blade, rip fence, push stick, blade guard assembly manual.

Features a 15. 0a high torque motor with the power to cut pressure treated lumber and hardwoods. Other specs: max rip to left of blade – 22inch | max rip to right of blade – 32-1/2inch | max width of dado – 13/16inch | arbor size – 5/8inch | Amps – 15 | Depth of cut at 45inch – 2-1/4inch | Depth of cut at 90° – 3-1/8inch | No Load Speed: 4800 RPM. Rack & pinion telescoping Fence System Make fence adjustments fast, smooth and accurate.
BrandDEWALT #ad
ManufacturerDewalt #ad
Height31 Inches
Length31 Inches
Weight110 Pounds
Width24.5 Inches
Part NumberDWE7491RS
ModelDWE7491RS
Warranty3 year limited manufacturer warranty

10. DEWALT

#ad

DEWALT Table Saw Stand, Mobile/Rolling DW7440RS

#ad
DEWALT #ad - Wide stand base and offset rear legs provide stability and support for material feed control. Delivers 20% less weight to carry than other competitive mobile stands. Heavy-duty kickstand allows the stand to balance upright for mobility and storage. Lightweight design weighs only 33lbs. Folding legs with quick release levers collapse under the stand, minimizing overall size for transport. Quick connect stand brackets attach to saw for easy detachment from stand for loading and unloading.
BrandDEWALT #ad
ManufacturerDewalt #ad
Height34 Inches
Length9 Inches
Weight40.5 Pounds
Width20 Inches
Part NumberDW7440RS
ModelDW7440RS
WarrantyThis DeWalt high-performance industrial tool comes with a warranty package that includes: 30-day, no risk satisfaction guarantee ; 1 year free service contract; 3 year limited warranty