Top 10 Drawer Handles Brushed Nickel – Cabinet & Furniture Pulls

As an Amazon Associate I earn from qualifying purchases.

1. homdiy


15 Pack homdiy Brushed Nickel Cabinet Pulls 3 Inch Kitchen Cabinet Handles Stain Steel Cabinet Hardware for Kitchen and Bathroom Cabinets, 5 Inch Overall Drawer Pull

homdiy #ad - The arc of this nickel handle is round and it has no corners, which can effectively prevent your child from bumping and injured. Simple but classic: this brushed nickel cabinet pulls are simple but depending on your application, can be very key in bringing the design together.

Measurements: 3 inch center to center with 5 in Overall Length. Please measure your cabinet HOLE CENTERS is 3in before you purchase cabinet handles. Material: homdiy cabinet pulls made of high quality Stainless Steel with brushed nickel finished, hollow construction but durable and hard to get rusty.

We promise to leave you without any worries, please buy with confidence. Screws: free screws of 1in25mm& 1. 57in40mm included are suitable for board thickness of cabinets. If you need other length screws, if you are not satisfied with this brushed nickel drawer pulls, please feel free to contact us ! Perfect service: best quality and service is our goal, please contact us.
Brandhomdiy #ad
ManufacturerHomidy #ad
Part NumberHD-LS201BSS

2. goldenwarm


Goldenwarm 25Pack Brushed Nickel Kitchen Cabinet Handles Drawer Pulls 4in for Bathroom Stainless Steel Pulls for Cabinet Door Modern Dresser Pulls Square Kitchen Cabinet Hardware

goldenwarm #ad - Easy install: drill holes at the place where you want to install kitchen cabinet hardware according to the hole center, then pass through the screw from the back of the board and tighten it to the cabinet handle.

Excellent service: best quality and service is our goal, please contact us. We promise to leave you without any worries, If you are not satisfied with your purchase, please buy with confidence. Package include: 25pack brushed nickel kitchen cabinet handles which is made of Stainless Steel, each pull matched two size screws 1 inch & 1.

57 inch. Widely compatible: modern drawer pulls, dresser drawers, wordrobe, closet, suitable for kitchen cabinet, cupboard, wooden furniture and so on. Measurement: hole centers: 4inch102mm; overall length:6-2/5inch162mm; Height: 1-3/10inch34mm; Width: 1/2inch12mm, Please measure your cabinet or old cabinet pull hole centers carefully before purchase.
Brandgoldenwarm #ad
Manufacturergoldenwarm #ad
Part NumberLSJ22BSS102-25Units CA



REGARSUN 24 Pack 3 Inch Brushed Nickel Cabinet Handles Kitchen Cabinet Pulls Drawer Pulls Dresser Pulls Stainless Steel Handles 5 Inch Overall

REGARSUN #ad - P>warranty & service if you have any problems on quality and unusable, we will give you a full refund. P>. P>appearance multi-ply brushed satin nickle appearance without fingerprints, drawers, and chamfered edges never hurt your hand or children while you are using.

Strictly dupro inspection by ISO9001 standard to guarantee high quality products. P>. Please measuring the board thickness and cutting the screws before your installation. P>. P>measurement hole to holecc: 3" 76mm, overall measurement: 5" 127mm, Projection height: 1. 2" 32mm, and diameter: 1/2" 12mm. P>. P>quanlity is priority this pulls are made of high quality stainless steel, and never rust even used in the humid environment.

P>accessory free mounting screws of 1" 25mm and 1-3/4"45mm that are suitable for different board thickness. Add value to your home. P>. The morden stylish design fits most indoor furnitures and most cabinets, dressers and cupboards, and good benefits to refresh your old furnitures.
ManufacturerREGARSUN #ad
Height1.3 Inches
Length5 Inches
Weight1.2 ounces
Width0.5 Inches



Brushed Satin Nickel Cabinet Pulls, 10 Pack 5 Inch Drawer Pulls, Square Stainless Steel Modern Kitchen Drawer Handles,Cabinet Handle ,Bathroom Cabinet Hardware Cupboard Door Pulls Bar Drawer Pulls

LKUSMK #ad - Appearance : the brushed satin nickel kitchen cabinet pulls can be used on various styles of cabinets, chest, wardrobe, which is simple and beautiful, drawers, cupboard and all of the modern Furniture and even door pulls, that makes you feel comfortable in using.

5 inch cabinet pulls size : center hole distance: 5 inch;Overall length 5-1/2 inch ; width: 1/2 inch ; thickness: 1/2 inch ; height: 1-2/5 inch. Erfect service : we promise if you are not satisfied with our drawer handles, You can choose to return the goods at any time. Material: lkusmk square polished nickel cabinet handles is made of high-quality stainless steel, oxidize, leave fingerprints, firm, which will not rust, exquisite cabinet hardware light weight, or fade.

The package includes : 1: with a pack of 10 pcs 5 inch polished nickel kitchen drawer pulls 2: With matching standard screws 20pcs*098 inch and 20pcs*1. 77 inch for you to choose and there are 3 sets of screws more for you to spare.
BrandLKUSMK #ad
ManufacturerLKUSMK #ad
Height1.4 Inches
Length5.5 Inches
Width0.5 Inches

5. Franklin Brass


10-Pack, Cabinet Handles and Drawer Pulls for Kitchen Cabinets and Dresser Drawers, Franklin Brass Brushed Nickel Simple Arched Pull, 3 Inch 76mm, P12447K-SN-B, Cabinet Hardware

Franklin Brass #ad - Personal - adding cabinet hardware is the perfect way to add your sense of style to your home décor. Style - brushed nickel is the ideal component to any wood stained or painted cabinets and drawers. A simple change can make a huge impact on the look and feel of any room. 10 pack for larger projects and replacements. Packaging - Packaged individually to protect finish. Installation - home improvement made easy. Standard installation hardware is included.
BrandFranklin Brass #ad
ManufacturerLiberty Hardware Manufacturing Corporation #ad
Height0.43 Inches
Length4.06 Inches
Weight0.05 Pounds
Width0.77 Inches
Part NumberP12447K-SN-B
WarrantyLimited Lifetime Warranty

6. Amerdeco


Amerdeco 10 Pack Brushed Satin Nickel 3.75 Inch96mm Hole Centers Kitchen Cabinet Pulls Hardware Modern Kitchen Handles for Cabinets Cupboard Handles Drawer Pulls

Amerdeco #ad - Wide application: perfect for cabinet, cupboard, drawer, closet, dresser, door, wardrobe. You can have fun with DIY and make your furniture look new and modern.

High quality: made of solid zinc alloy, strong, durable and easy to install. 120 days after-sales guarantee: amerdeco is committed to bringing high quality handles to our customers and will replace or give you a full refund if any quality issues arise within 120 days. Also has good appearance and fine touch. Measurement: hole centerscc:3. 75 inch96mm; overall length:4-5/8inch118mm;width:2/5 inch10MM;Projection:1-1/4 inch31MM; Please check the Size of handles you require carefully before purchasing. Packaging: each handle has its own package, which can effectively prevent bumping and scratching.
BrandAmerdeco #ad
ManufacturerAmerdeco #ad

7. Ravinte


Ravinte 15 Pack 3 inch Drawer Pulls Brushed Nickel Cabinet Cup Pulls Kitchen Hardware Cabinet Handles Drawer Handles Knobs

Ravinte #ad - Provide enough time for you to know about our 3 inch drawer pulls. Simple look: the brushed nickel cabinet pulls have a wide appeal across a range of kitchen cabinet doors and drawers. 100-day free trial: though our cabinet knobs and door pulls are definitely of high quality, for the benefits of our customers, we decided to use a free trial.

Durable design& fine touch: with advanced technique, the drawer pulls is made to be long lasting, accompanied with good looking and fine touch. Size of cabinet hardware: overall length: 3-11/16 inch; Width: 1-1/4 inch; Screw-hole distance: 3 inch.

The brushed nickel pulls have a clean and timeless look that works with farmhouse, vintage, traditional and transitional styles. If you're replacing your handle, measure and ensure the center to center hole spacing of the current handle is 3 inches. Installing new cabinet handles, drill two holes with center to center spacing of 3 inches.
BrandRavinte #ad
ManufacturerRavinte #ad

8. Ravinte


Ravinte 30 Pack 3 Inch Cabinet Pulls Brushed Nickel Sqaure Kitchen Cabinet Handles Silver Cabinet Hardware Stainless Steel Drawer Pulls 5 Inch Overall Length with Mounting Template

Ravinte #ad - Easy to install: the brushed nickel cabinet pull 3 inch center comes with a set of mounting templates a door template, drawer template, and drill bit. Durable material: the silver cabinet handles made of stainless steel finished with classic brushed nickel coordinates well with other appliances and accessoriess.

The brushed nickel hardware for cabinets have a clean and timeless look that works with farmhouse, vintage, modern styles. If you have any questions with our nickel pulls before or after purchase, please be free to contact us. Risk-free 100 days trail:ravinte provides 100 days free trial. Align the template and mark the door or drawer. We will solve your problem within 24 hours.

You could install the satin nickel hardware for cabinets easily. Popular style: the stainless steel cabinet handles have a wide appeal across a range of kitchen cabinet doors and drawers. Then drill the holes you marked. Please measure and confirm the hole center you need before buying. Measurement: hole center: 3 inch76mm, total Length:5 inch128mm, width: 1/2 inch12mm, Projection:1-2/5 inch35mm.
BrandRavinte #ad
ManufacturerRavinte #ad

9. Amazon Basics


Amazon Basics Euro Bar Cabinet Handle 1/2-inch Diameter, Satin Nickel, 7.38-inch Length 5-inch Hole Center, 10-Pack

Amazon Basics #ad - Pull length: 7. 38-inch. Fits most cabinets; includes 1-inch & 1. 5-inch mounting screws; you may need to purchase screws of additional length depending on your cabinet’s width; machine screw metric size: M8-32. Projection: 1. 38-inch. Hole to hole center: 5-inch. Satin Nickel Finish.
BrandAmazon Basics #ad
ManufacturerAmazon Basics #ad
Height0.5 Inches
Length7.38 Inches
Width1.38 Inches
Part Number0



30 Pack, 3" Hole Center Cabinet Handles Pulls for Kitchen Stainless Steel Brushed Nickel Drawer Pulls 5" Length )

NISUOIEN #ad - Technology: these brushed nickel stainless steel home hardware handles are manufactured using the latest and technology, and 30 pack cabinet handles have small errors and high precision. Durable: this kind of cabinet handles / drawer pulls are processed by the newest manufacturing technology.

Hollow. They can be installed on kitchen cabinet, corner cabinet, shoe cabinet, bedroom furniture, shelves, furniture door, study desk, cupboard, shoe box, desk with drawers, wardrobe, bookcase, bathroom cabinet, wine cabinet or locker. Wide use: our drawer handles are widely used kitchen/cabinet/furniture hardware.

Good quality: these kitchen cabinet handles are made of stainless steel finished with brushed nickel. And the handles are strongly corrosion resisting, not easy to fade, wear resistant, and not easy to rust. These cabinet pulls and accessories have good quality even after many years of use. Size: cabinet handles overall length: 5"128mm, Hole CentersCC: 3"76mm, Diameter: 05"12mm.
ManufacturerNISUOIEN #ad
Height17.72 Inches
Length60 Inches
Width4.72 Inches
Part NumberSY2020_A01