Top 10 Bit Holder Set – Screwdriver Bit Holders

As an Amazon Associate I earn from qualifying purchases.

1. KAIFNT

#ad

KAIFNT K406 Magnetic Bit Holder Set with Guide Sleeve and Adjustable Depth Magnetic Tip, 3-Piece

#ad
KAIFNT #ad - Adjustable depth bit holder to adjust bit position to control depth of screw. Bit holders include a magnetic tip and two guide sleeves of different lengths, 2-3/8, 3-1/8 and 4-3/4 inches. Works with all 1-inch insert bits. Magnetic bit holder provides convenient pick-up and retention of screws. Tip ring magnet holds screw securely for accurate fastening. Self-retracting guide sleeve protects fingers and keeps the fasteners straight.
BrandKAIFNT #ad
ManufacturerKAIFNT #ad
Height0.59 Inches
Length1.57 Inches
Width7.87 Inches
Part NumberK406

2. Makita

#ad

Makita A-96920 Impactx 2-3/8″ Magnetic Insert Bit Holder

#ad
Makita #ad - Hex shaft is constructed of S2 performance optimized steel for extended life. C-clip securely retains 1” bits in the holder. Magnetic bit holder provides convenient pick-up and retention of screws. Two-piece design is engineered for maximum versatility. Calibrated, heat treated hex shaft for added durability.
BrandMakita #ad
ManufacturerMakita #ad
Height5.75 Inches
Length0.47 Inches
Weight0.09 Pounds
Width1.88 Inches
Part NumberA-96920
ModelA-96920

3. BOSCH

#ad

Bosch ITBHQC201 2 1/4", Impact Tough Quick Change Bit Holder

#ad
BOSCH #ad - Advanced design provides secure fit. 10x life over standard impact bits. Extended torsion zone helps to absorb high torque of new impact drivers. High visibility sleeve with laser etched markings for user convenience. Heat treated manufacturing for increased durability.
BrandBOSCH #ad
ManufacturerBosch #ad
Height1.17 Inches
Length0.59 Inches
Width1.75 Inches
Part NumberITBHQC201
ModelITBHQC201

4. BOSCH

#ad

Bosch ITBH201 2 In. Impact Tough Screwdriving Bit Holder

#ad
BOSCH #ad - 10x life over standard impact bits. High-visibility sleeve with laser-etched markings for user convenience. Bit Holder. Heat-treated manufacturing for increased durability. Xtended torsion zone helps to absorb high-torque of new impact drivers. Included components: Impact Tough 2 In. Advanced design provides secure fit.
BrandBOSCH #ad
ManufacturerBosch #ad
Height1.01 Inches
Length0.47 Inches
Width1.75 Inches
Part NumberITBH201
ModelITBH201

5. Makita

#ad

Makita B-35097 Impact Gold Ultra-Magnetic Torsion Insert Bit Holder

#ad
Makita #ad - Two piece design is engineered to allow the torsion technology to fully activate. Rare earth neodymium magnet is 2x stronger than magnets in standard insert bit holders. Xtreme torsion technology is engineered to allow the torsion section of the bit holder to flex under load, taking pressure off of the bit tip for increased durability in high torque applications. High quality steel engineered for use with impact drivers. Designed exclusively for high torque impact drivers.
BrandMakita #ad
ManufacturerMakita #ad
Height0.67 Inches
Length1.88 Inches
Width6.75 Inches
Part NumberB-35097
ModelB-35097

6. Toolcool

#ad

Toolcool 10pcs 12 Holes Hex Shank Screwdriver Bit Holder Plastic Screwdriver Head Storage Case

#ad
Toolcool #ad - Approved the screwdriver drill head inserted the plastic pouches easy. It can be inserted 12 pieces 6. 35mm/ 1/4 inch standard screwdriver bits.
BrandToolcool #ad
ManufacturerToolcool #ad
Height0.59 Inches
Length3.8 Inches
Weight0.02 Pounds
Width0.39 Inches
Part NumberTC0705

7. QWORK

#ad

Magnetic Extension Chuck Adapter set for Screws, Nuts, QWORK 3 Pcs 1/4 Inch Hex Shank Quick Release Bar Socket Screwdriver Bit Holder, Drill,Driver,bit set and Handheld Driver

#ad
QWORK #ad - 4 hex shank: 1/4" hex shank 6. 35mmcan be easily fit into power driver, drill and handheld screwdriver. 5 extension set for all kinds of screwdriver bits, screwdriver head conversion uses. 2 quick change and release system allows you to quickly install, lock and unlock the bit easily. 3 magnetic bit holder provides convenient pick-up and retention of screws. 1 3 pieces set with different length 60mm, 100mm, 150mm.
BrandQWORK #ad
ManufacturerQWORK #ad
Height0.59 Inches
Length5.91 Inches
Width1.57 Inches
Part NumberWD1804
ModelWD1804

8. Rocaris

#ad

Rocaris 10 Pack Magnetic Extension Socket Drill Bit Holder 1/4" Hex Power Tools

#ad
Rocaris #ad - Must-have accessory set for power drills and impact drivers. Strong magnet holds bits securely, and the magnet is located inside the chrome tube. Great for working with hard to reach screws. Designed for 1/4" hex shank bits. Unlimited uses in automotive, home, hobby, hardware, etc.
BrandRocaris #ad
ManufacturerDrill Warehouse #ad
Height2.8 Inches
Length5 Inches
Width0.7 Inches
Part Number4158103
ModelD-06

9. Neiko

#ad

Neiko 00244A Impact Socket Adapter & Magnetic Bit Holder, 3 Inch W/Bit Holder, 4Piece Set | 1/4" Hex Shank with 1/4, 1/2" Drive | CR-V, 3/8

#ad
Neiko #ad - Set comes with 1 1/4-inch hex shank magnetic bit holder and 3 impact grade 1/4-inch hex shank socket adapters with a 1/4, 3/8, and 1/2-inch drive.

One 1/4-inch hex shank magnetic bit holder is included for jobs requiring extensions into hard-to-reach spaces. All chrome vanadium steel pieces are heat treated for superior strength, with black phosphate coating finish to protect against rust and corrosion. Detent ball on adapters provide a secure fit into the socket, delivering support when used with high torque drivers. Drill to impact-ready socket adapters are compatible with respective-sized sockets, ratchet handles, extension bars, corded and cordless drivers for all your fastener needs.
BrandNeiko #ad
ManufacturerNeiko #ad
Height0.98 Inches
Length5.51 Inches
Weight0.07 Pounds
Width3.94 Inches
Part Number00244A
Model00244A

10. DEWALT

#ad

Magnetic, DEWALT Bit Holder, 6-Inch DW2055B

#ad
DEWALT #ad - Made in China. Length: 006 inches. Dewalt dw2055b 6" magnet DR Guide. Height: 7. 1 inches. Dewalt accessories.
BrandDEWALT #ad
ManufacturerDewalt #ad
Height7.1 Inches
Length0.06 Inches
Width4.8 Inches
Part NumberDW2055B
ModelDW2055B
Warranty30 Day Money Back Guarantee